Samsung HW-M4500/EN, HW-M4500/ZG Method 2. Connecting Wirelessly, Connecting a TV via Bluetooth

•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the cable is connected to the correct port.

•• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.

NOTES

•• HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.

•• If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.

•• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 14 mm.

•• Anynet+ must be turned on.

•• This function is not available if the HDMI cable does not support ARC.

Method 2. Connecting Wirelessly

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

•• Only one TV can be connected at a time.

The initial connection

1.Press the (Source) button on the top panel or on the remote control, and then select “BT”.

2.Change “BT” to “BT PAIRING”.

•• If “BT READY” appears, press and hold the (Source) button on the top panel of the Soundbar or on the remote control for more than 5 seconds to display “BT PAIRING”.

3.Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)

4.Select “[AV] Samsung Soundbar Mxxxx M-Series” from the list on TV’s screen.

An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV Bluetooth device list. To connect to the Soundbar, select the message and establish a connection.

•• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.

5.You can now hear TV sound from the Soundbar.

ENG - 11