Programming the Order of CD Play- back

The order in which you listen to the tracks on the discs loaded

Which tracks you do not wish to listen to

You can program up to 24 tracks.

You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function.

1	If the CD function is selected, stop the player by pressing	.
1	If the CD function is selected, stop the player by pressing	.
2	Load the selected CDs.
3	Press PROGRAM.
3	Result: The following indications are displayed:

(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)

4	If necessary, select the disc containing the required track by pressing
	the corresponding DISC (1, 2, 3) button.
5	Select the required track by turning the MULTI JOG knob:
	To the left to move back through the tracks

To the right to move forward through the tracks

6 Press PROGRAM to confirm your selection.

	Result: The selection is stored and		is displayed.
7	To select other tracks, repeat Steps 4 to 6.
8
	Press CD (	) to listen to the track selection in the order


	programmed.
9
9	To...		Turn the MULTI JOG knob...
	Listen to the current track again		One notch to the left
	Listen to the previous track		Two notches to the left
	Listen to the next track		One notch to the right
	Skip forwards or backwards one		The appropriate number of
	or more tracks		notches to the right or to the
			left

10 To cancel the selection, press .

Once if the compact disc player is stopped Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track.

You can also use the / buttons to select the required tracks in step 5, 9.

Checking or Changing Programmed CD Tracks

You can check or change your selection of tracks at any time.

1 Press once if you have started listening to the selection.

2 Press PROGRAM.

Result: The following indications are displayed:

(CH = Check, 01=Program No, CH1 = Disc No, – – = Track No on the disc)

If you have already programmed 24 tracks, CH is displayed instead of PR when you press PROGRAM.


3	Press PROGRAM again.
	Result: The first track selected is displayed, together with the letter CH (Change).
4	Press PROGRAM once or more times until the track to be changed is dis-
	played.
5	If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6	Press	and		or turn MULTI JOG to select a different track.


7	Press PROGRAM to confirm your change.
8	Press CD (
			) to start listening to the selection.
			) to start listening to the selection.
	Result: The first track selected is played.