Listening to a Cassette
GB
Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 24.
1 | Switch the system on by pressing the STANDBY/ON button. | ||
2 | Select the TAPE function by pressing TAPE on the front panel. | ||
3 | Open either cassette deck 1 or 2 by pushing and releasing the deck | ||
4 | cover where PUSHE JECT ( |
| ) is written. |
| |||
Insert the | |||
| facing downward. | ||
5 | Close the deck by pushing on it until it clicks into place. | ||
| Result: Depending on the deck selected, the 1 or 2 indication is | ||
| displayed in front of the counter number. | ||
6 | If you have inserted two cassettes, press DECK 1/2 on the front | ||
| panel or directly the DECK 1/2 button on the remote control to select | ||
the cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2 indication is displayed.
7 To listen to... | Press ... |
|
Side A,B | TAPE ( | ) |
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions as required or on the remote control.
8Main Unit
To...Press...
Rewind the cassette
Remote Control
To...Press ...
Rewind the cassette
9 To... | Press ... |
Stop the playback |
|
1 |
|
| 2,7 |
8 | 8 |
| 9 |
| 6 |
18 |
|
CD Synchro Record Feature
You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
1 | Switch the system on by pressing STANDBY/ON. |
2 | Insert a blank cassette in Deck 2. |
3 | Select the CD function by pressing CD on the front panel. |
4 | Load a compact disc. |
5 | Select the required disc. |
6 | Select the required track and press CD SYNCHRO or press CD |
| SYNCHRO directly to start recording at the beginning of the disc. |
Result: REC and SYNC are displayed and recording starts.
7 To stop recording, press . |
3 |
1 |
7 |
6 |
Recording a Compact Disc
The direct recording mode enables you to start recording with any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1 | Switch your system on by pressing STANDBY/ON. |
|
|
|
| ||||||||||||
2 | Insert a blank cassette in Deck 2. |
|
|
|
| ||||||||||||
3 | Select the CD function by pressing CD on the front panel. | ||||||||||||||||
4 | Load the compact disc. |
|
|
|
| ||||||||||||
5 | Select the required disc. |
|
|
|
| ||||||||||||
6 | Select the required track on the compact disc and press |
|
|
| on the front | ||||||||||||
|
| ||||||||||||||||
|
| ||||||||||||||||
| panel or |
|
|
|
|
|
| on the remote control to set the compact disc player to Pause | |||||||||
|
|
|
|
| |||||||||||||
| mode. |
|
|
|
|
|
|
|
|
|
|
|
| ||||
7 | Press the REC/PAUSE. |
|
|
|
| ||||||||||||
| Result: REC is displayed. |
|
|
|
| ||||||||||||
8 | Press the |
|
|
| to start playing the track. |
|
|
|
| ||||||||
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
| ||||||||||||
| Result: The track is recorded on the cassette. |
|
|
|
| ||||||||||||
9 | To stop recording, press |
| . |
|
|
|
|
| |||||||||
|
|
|
|
| |||||||||||||
|
|
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3,6,8
1
9
7
