Samsung MMB9QH/XFO Selecting a Stored Station, Improving Radio Reception, To listen to Press

Searching for and Storing the Radio Stations

GB	You can store up to:
		15 FM stations
		8 MW stations
		7 LW stations
	1 Switch the system on by pressing On/Standby ( ).
	2 Select the required frequency band by pressing TUNER (Band)
		again on the front panel or Band on the remote control.
		Result: The appropriate indication is displayed:
		FM	Frequency Modulation
		AM(MW)	Medium Wave
		LW	Long Wave
	3
		To search for a	Press Tuning Mode
		station...
		Manually	One or more times until MANUAL
			is displayed.
		Automatically	One or more times until AUTO is
			displayed.

PRESET function is explained in detail in the section “Selecting a Stored Station” on.

4 Select the station to be stored by: or

Pressing or buttons to increase or decrease the frequency respectively.

To scroll through the frequencies faster when

searching manually, hold down the or buttons.

The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode.

5 If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

aPress Program/Set.

Result: The PRGM is displayed for a few seconds.

bPress or to assign a program number between 1 and 15.

cPress Program/Set to store the radio station.

Result: PROGRAM is no longer displayed and the station is stored.

6 To store any other radio frequencies required, repeat Steps 3 to 5.

The PROGRAM function can be used to assign a new station to an existing program number.

Demo	REC/Pause	2	TUNER/Band		Power	Sound
			C D		Surround	Mode
On/Standby
	CD Synchro				Sleep
AUX		4 5	TAPE	4 5		Open/Close
	CD Repeat				Mono/ST
1						S.Bass
			Tuning Mode			Level

Multi Jog

Phones		3	4 5
		FRONT LOADING MECHANISM
5		VOL.	2
Program/			Band
Set	5	3	4 5
4		Tuning
		Mode
		VOL.

Selecting a Stored Station

You can listen to a stored radio station as follows:

1	Switch the system on by pressing On/Standby ( ) .
2	Select the required frequency band by pressing TUNER(Band) on
	the front panel.
3	Select the radio station as follows.
	To listen to ...	Press ...
	Stored station	1. the Tuning Mode button until “PRE-

SET” is displayed.

2. or button to select the required program.

Demo	REC/Pause	TUNER/Band	S
		2
On/Standby
	CD Synchro	C D
1
		TAPE
AUX
	CD Repeat		M
		Tuning Mode
		3
Phones		FRONT LOADING MECHANISM

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

If reception from a specific FM radio station is poor, press Mono/ST. to switch from stereo mode to mono. The quality of the sound will be improved.

Program/	VOL.	Band
Set

Tuning

Mode

VOL.

Mute

14