Connecting to an External Source

The auxiliary input can be used to take advantage of the sound quality of your micro component system when listening to other sources.

	Examples:	A television
		A video disc player
		A Hi-Fi stereo video cassette recorder
	To connect the external source, the source must have an audio
	output. In addition, you need an RCA connection cable.

1	Set the system to standby mode and disconnect it and the external
	source from the main.
2	Connect the audio cable to the rear of the micro component system.
	Connect the...		To the connector marked...
	Red jack		R (right)
	White jack		L (left)
	For optimum sound quality, do not invert the right and left
	channels.
3	Plug the system back into the main socket and press On/Standby
	( ) to switch it on.
4	Select the AUX source by pressing AUX.
	Result: AUX is displayed.
5	Switch the external source on.
6	Adjust the volume and balance as required:
	Volume	Equalizer	S.Bass

Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo (as if you were in a cinema).

Speaker Connection

The System has Main Speaker jacks and Subwoofer Speaker jacks.

Main Speaker Connection: Connect the Main Speaker cords (red/black) to the Main Speaker jacks of the System

Subwoofer Speaker Connection: Connect the Subwoofer Speaker cords (blue/black) to the Subwoofer Speaker jacks of the System

(Right Speaker)

(Left Speaker)

+	+
–	–

–

CD Digital Out Jack

This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment.

(DAT deck, MD recorder, etc.).

Remove the dust cap (1) from the CD DIGITAL OUT jack. Then, connect an optical cable plug to the CD DIGITAL OUT jack.

(1)

When the CD DIGITAL OUT jack is not being used.

Attach the supplied dust cap.

Directions in Installing Speaker

Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.

Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.

Do not take the speaker apart from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display.