Microphone Function (option)
The microphone enables the user to mix in his or her vocals to
Preparation
Plug the microphone with a 3.5mm mic jack into microphone terminal.
Connecting Headphones
You can connect a set of headphones to your micro component system so that you can listen to music or radio programmes without disturbing other people in the room. The headphones must have a 3.5 mm jack or appropriate adapter.
Connect the headphones to the Phones connector on the front panel (or top right coner).
Result: The loudspeakers are no longer used for sound output .
Prolonged use of headphones at a high volume may damage your hearing.
Connecting to an External Source
The auxiliary input can be used to take advantage of the sound
quality of your micro component system when listening to other GB sources.
Example: | A television |
A video disc player
A DAT or DCC cassette player
A
To connect an external source, the source to be connected must have an audio output. In addition, you must have an RCA connection cable.
1Before connecting the external source, set the system to standby mode and disconnect it and the external source from the mains.
2Connect the audio cable to the rear of the system.
Connect the... | To the connector marked... |
Red jack | R (right) |
White jack | L (left) |
For optimum sound quality, do not invert the right and left channels.
3Press On/Standby switch it on.
4Press AUX.
Result:AUX is displayed.
5Switch the external source on.
6Adjust the volume and balance as required:
Volume
Equalizer
S. BASS
Example: You can watch a film and take advantage of stereo sound as if you were at the cinema (provided that the original sound track is in stereo).
CD Repeat | |
A | B |
Timer
Clock
Mute
On/Standby
3
Band |
|
TUNER | CD |
TAPE | AUX |
4
Down | Tuning Mode | Up |
Volume
EQ
S.Bass
15