Samsung MMZJ8DABRH/ELS manual Setting the Clock, Demo Function, Dimmer Function, Press PROGRAM/SET

DEMO Function

GB

You can view the various functions available on your system.

1	Press and hold DEMO/DIMMER button.
	Result: The various functions available are listed in turn on the
	display.
	All these functions are described in detail in this booklet.
	For instructions on how to use them, refer to the appropriate
	sections.
2	To cancel this function, press DEMO/DIMMER again.

DIMMER Function

You can adjust the brightness of the LCD display depending on the surrounding lighting conditions.

1 Press the DEMO/DIMMER button.

Your selection switches each time the button is pressed:

DIMMER ON(Dim) ➞ DIMMER OFF(Bright).

Setting the Clock

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro component system

After a power failure After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing (	) .
2	Press TIMER/CLOCK twice.
	Result: CLOCK is displayed.
3	Press PROGRAM/SET.
	Result: The hour flashes.
4
	To...	Press...
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press PROGRAM/SET.
	Result: The minutes flash.
6
	To...	Press...
	Increase the minutes
	Decrease the minutes
7	When the correct time is displayed, press PROGRAM/SET.
	Result: "TIMER" appears in the display.
	The current time is now set.

You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

You can use / buttons on the front panel to instead of / buttons on the remote control.

1

2

4,6

4,6

3,5,7

10