Samsung MMZJ8DABRH/ELS manual Listening to a Cassette, Selecting the Cassette Playback Mode

Listening to a Cassette

GB

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 26.

1	Switch the system on by pressing (					).
2	Open the cassette deck by pushing on the corner of the cover
	marked PUSH EJECT (			) until you hear a click and then releasing it.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downwards.
3	Close the deck by pushing on it until it clicks into place.
4
	To listen to...					Press ...
	Side A					Tape (			) button once.
	Side B					Tape (			) button twice.
	Result: The cassette starts playing.
5	Press the	,	or	,	button if necessary.
	To...					Press ...
	Rewind the cassette						/		button.
	Fast-forward the cassette							/	button.

6 When you have finished playback, press button.

1		4
		6
	5	5

Selecting the Cassette

Playback Mode

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically.

Press REV.MODE until the appropriate symbol is displayed.

When the display indicates... The micro component system plays

back...

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

20