Samsung SCC-B1331BP, SCC-B1031P manual AGC OFF, Very LOW, LOW, MID, HIGH, Very HIGH, USER, FIX

How to use OSD Menu

The LEVEL menu is used to adjust the

overall brightness, where “+” will increase the brightness and “–” will decrease it.

②If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area.

you can set the desired BLC zone by defining the size and location.

		‹ALC‹
LENS				DC
LEVEL			[00]----I	----
	BACKLIGHT			BLC
	AREA			USER
	<SIZE>￿
	<LOCATION>￿
￿		￿		￿

If you use an ordinary camera in a scene with an intensive backlight, the object will be displayed dark on the monitor affected by the backlight. To solve this problem, you can use the BLC(Back Light Compensation) function to improve the sharpness of the image in such a high contrast scene.

Namely, it improves the sharpness of the picture in outdoor scenery as well as indoor.

•ELC (Electronic Light Control)

①If you press the SETUP switch when the ELC￿ submenu is selected, the corresponding screen appears. You can make the ELC (Electronic Light Control) function active or not.

	‹ELC‹
LEVEL	[00]----I----
BACKLIGHT		OFF
￿	￿	￿

②In similar to ALC setting, you can specify the BLC area.

	‹ELC‹
LEVEL		[00]----I	----
BACKLIGHT			BLC
AREA			USER
<SIZE>￿
<LOCATION>￿
￿	￿		￿

❖ AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER, FIX]
The AGC (Auto Gain Control) menu is used to	ENG
set the AGC level of the camera. When the AGC
is active, the camera automatically increases the
sensitivity by amplifying the Video signal when
the strength of the signal falls below the normal
value.
If OFF or FIX mode is selected in the SENS-UP
menu, you can specify the AGC level.
If you press the SETUP switch with a USER
sub menu selected, you will see the appropriate
screen.

‹AGC USER‹

LEVEL[16]

￿ ￿ ￿

In USER mode, you can break down the level in 16 steps from VERY LOW to VERY HIGH to your preference.

English – 17