POWER MANAGEMENT
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the power boost function, Power Management automatically reduced the heat setting of cooking zone.
•Left side : No.1 and No.2 is paired
cooking zone
The indicator for this cooking zone
alternates for some seconds between the set heat setting and the maximum possible heat setting. After then, the indicator changes from the set heat setting to maximum possible heat setting.
PAUSE
The PAUSE function simultaneously switches all cooking zones that are switched on to the low power setting and then back to the heat setting that was previously set. This function can be used to briefly interrupt and then continue the cooking process e.g. to take a telephone call.
When the PAUSE function is activated, all touch sensors except for the ‘PAUSE’, ‘Lock’ and the ‘On/Off’ control sensors are disabled. To resume cooking, touch the PAUSE sensor again.
| Control Panel | Display | ||||
|
|
|
|
|
|
|
To Switch on | Touch PAUSE |
|
|
|
|
|
|
|
| ||||
|
|
| ||||
|
|
|
|
|
|
|
To Switch off | Touch PAUSE |
|
|
|
| Return to previous power level |
|
| |||||
|
| |||||
|
|
|
|
|
|
|
Timer functions are not stopped by PAUSE .