Samsung LT24B300EWH/CI, LT22B350EW/EN manual Picture Mode t, Samsung MagicAngle, Screen Adjustment

Basic Features

Picture Menu

¦¦ Changing the Preset Picture Mode

MENUm→ Picture → Picture Mode → ENTERE

Picture Mode t

Select your preferred picture type.

✎✎When connecting a PC, the Picture Mode is only available the Standard and Entertain.

■■ Dynamic: Suitable for a bright room.

■■ Standard: Suitable for a normal environment.

■■ Movie: Suitable for watching movies in a dark room.

■■ Entertain: Suitable for watching movies and games.

✎✎ It is only available when connecting a PC.

¦¦ Adjusting Picture Settings

MENUm→ Picture → ENTERE

Samsung MagicAngle

Adjust screen viewing Angle to optimize screen quality according to your viewing position.

■■ Samsung MagicAngle: When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front.

xx Off: Select when viewing from the front position.

xx Lean back mode: Select when viewing from a slightly lower position.

xx Standing Mode: Select when viewing from the upper position.

■■ Mode: Adjust screen viewing angle.

✎✎When Samsung MagicAngle is set to Lean back mode or Standing Mode, Gamma is not available.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality control.

✎✎NOTE

xx In analogue TV, PC, AV modes of the PAL system, the Tint (G/R) function is not available.

xx When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness.

xx Settings can be adjusted and stored for each external device connected to the LED display.

xx Lowering picture brightness reduces power consumption.

Screen Adjustment

■■ Picture Size: Your cable box / satellite receiver may have its own set of screen

sizes as well. However, we highly recommend you use 16:9 mode most of

the time.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnifies the picture size more than 4:3. ✎✎ Adjusts the Position by using u / dbuttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.

✎✎ Adjusts the Zoom or Position by using u / d button.

4:3: Sets the picture to basic (4:3) mode.

✎✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (720p / 1080i / 1080p) signals are inputted.

✎✎ Adjusts the Position by using u / d/ l/ rbutton.

✎✎NOTE

xx Depending on the input source, the picture size options may vary.

xx The available items may differ depending on the selected mode.

xx When connecting a PC, only 16:9 and 4:3 modes can be adjusted.

xx Settings can be adjusted and stored for each external device connected to an input on the LED display.

xx If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.

■■ Zoom / Position:You can adjust picture size and position by u/ d/ l/ rbutton.

✎✎ It's only available when picture size is set as Zoom and Wide Zoom.

✎✎ In Wide Zoom mode, you can only use Position adjustment.

✎✎ Reset: Reset the Zoom and Position to the default settings.

■■ 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

✎✎ Not available in HDMI , Component, and HDMI/DVI mode.

English 23