|
| monitor' by searching new |
|
| Hardware. |
|
| MagicTune is an additional software |
|
| for the monitor. Some graphic cards |
|
| may not support your monitor. When |
|
| you have a problem with the graphic |
|
| card, visit our website to check the |
|
| compatible graphic card list |
|
| provided. |
|
| http://www.samsung.com/monitor/magictune |
MagicTune™ doesn't | Have you changed your | Download the latest program. The |
work properly. | PC or video graphic card? | program can be downloaded |
|
| http://www.samsung.com/monitor/magictune. |
Check the following items if there is trouble with the monitor.
1.Check if the power cord and the video cables are properly connected to the computer.
2.Check if the computer beeps more than 3 times when booting.
(If it does, request an
3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.
4.Check if the scanning ratio of the video screen is set at 75Hz. (Do not exceed 60Hz when using the maximum resolution.)
5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized service center.
Q & A
Question
How can I change the frequency?
Answer
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
How can I adjust the resolution?
How can I set the Power Saving function?
Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.
* Contact the video card manufacturer for details.
Windows ME/XP/2000 : Set the function at
How can I clean the outer case/LCD Panel?
Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor.