Samsung LS19RTUSS/EDC, LS19RTUSS/XSG manual Connecting to a Computer

Connecting the monitor

1. Connecting to a Computer

1.Connect the power cord to the DC adapter and then connect the adapter jack to the DC POWER port on the monitor. (Voltage is automatically adjusted by the power adapter.).

2-1.Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

3.Connect the audio cable for your monitor to the audio port on the back of your computer.

4.Connect the power cord insert a plug in a wall outlet.

5.Turn on both your computer and the monitor.

6.You may enjoy clear and quality sound from the computer sound card using the monitor speakers. (You don't need to install any separate speakers for your computer.)

You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-sub and DVI cables to one computer.