![](/images/new-backgrounds/1323005/32300573x1.webp)
| • HRC |
| • IRC |
| • AFN |
| STD, HRC, IRC, AFN, and Air identify various types of cable TV systems. |
| Contact your local cable company to identify the type of cable system that |
| exists in your particular area. |
Auto | The TV automatically cycles through all of the available channels and stores |
Program | them in memory. This takes about one to two minutes. |
| In rare cases, "Auto program" may miss a few channels due to weak signals |
| and the channels may not be added to the channel memory. |
Add/Delete | Adds or deletes channels from the memory. |
Fine Tune | Due to weak signals or an incorrect antenna configuration, some of the |
| channels may not be tuned correctly. |
LNA | Amplifies signals when antenna reception is poor. However, if incoming |
| signals are interfering with each other, turn off LNA as it may malfunction. |
| • On / Off |
Setup
Available Mode | : PC / DVI | : TV : AV : | : Component | ||||
|
|
|
|
|
|
|
|
OSD |
| Description |
|
|
|
| Play/Stop |
Area |
| When you turn the power on of the product for the first time since it released | |||||
Configuration |
| from a factory, menu to select location will appear. |
|
|
| ||
|
| Choose the region and country where you use the monitor. |
|
|
|
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Note : This product can be used worldwide if area configuration is set up regardless of broadcasting type.
Note : If country is not selected properly, the product may not locate channels.