![](/images/new-backgrounds/1244019/24401989x1.webp)
There is no response when I right- click “Samsung UbiSunc (P:) (USB Monitor)” in the “My Computer” window and click “Eject” in the displayed menu.
The screen size of the USB monitor is larger than the actual monitor size.
The screen size of the USB monitor is smaller than the actual monitor size. The screen is centered on the monitor.
I disconnected or turned off my USB monitor but my PC still displays the old monitor information in the Display Properties window.
Icons and photos are broken or jagged in Clone mode (USB monitor).
How I can clone or extend screen mode?
2.Select ‘Samsung UbiSync Monitor’ from the list and click ‘Remove’.
Though your USB monitor is recognized as a drive by your PC, it has been designed so that the context menu usually displayed when
If the primary monitor has a high resolution, screens are expanded beyond the recommended resolution in Clone mode (USB monitor). (Recommended resolution: 1280x1024)
If the primary monitor has a high resolution, screens are smaller than the recommended resolution in Clone mode (USB monitor). (Recommended resolution: 1280x1024)
The deactivated USB monitors are such that the power to them is turned off or their USB cables are disconnected. To remove this information, you have to remove the 'Samsung Ubisync Monitor' program from ‘Add/Remove Programs’ in the ‘Control Panel’.
If you remove the program you cannot use all the connected USB monitors. If you want to use the USB monitor again, you have to setup the installation program again.
This occurs because Windows does not send the screen updating information to Clone mode if Extended mode is active on a single PC.
We recommend using the monitor in Extend mode.
Open the “Display Properties” window and select the “Settings” tab, Configure the screen mode in the “Settings” tab.
-For more information on how to configure the settings, click here.
Self-Test Feature Check
Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.
1.Turn off both your computer and the monitor.
2.Unplug the video cable from the back of the computer.
3.Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or damaged.
4.Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.