Samsung LS19MBPXHV/EDC, LS19MBPXFV/EDC, LS19MBXXFV/EDC Question, Answer, Self-Test Feature Check

Page 44

work properly.

your PC or video

be downloaded

 

graphic card?

http://www.samsung.com/monitor/magictune.

Visit our website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

Answer

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the computer or the screen saver. (Refer to Windows/Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor.

The edges of the monitor's transparent case are shown with white stains.

This phenomenon is the light reflection of the transparent case. (Prism Effect) The monitor can be seen differently by the angle of the monitor or the direction or strength of the outside light. (Cover the top of the transparent case with your fingers. The stain might be disappeared.)

Self-Test Feature Check

Self-Test Feature Check Warning Messages Environment Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

Image 44
Contents SyncMaster 971P Power NotationalInsert the power plug firmly so that it does not come loose Do not disconnect the power cord while using the monitorDo not use a damaged or loose plug Use only a properly grounded plug and receptacleInstallation Do not drop the monitor when moving itKeep any heating devices away from the power cable Do not place the product on the floorClean Set down the monitor carefullyDo not place the monitor face down Keep the plastic packaging bag out of childrens reachOthers Do not remove cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsRemove and discard vinyl bag from power adapter before use Keep all power adapters apartKeep power adapter away from any other heat source Falling product could cause physical damage even death Page Monitor List of FeaturesUnpacking Front Natural Color softwareAutoRotation software Customized Key Power indicator / Power button Auto SetupPower On/Off MagicColorRear Auto adjustmentInput Source UP USB upstream port Down USB downstream portConnecting the Monitor Pivoting Click WindowsInstalling the Monitor Driver Manual Microsoft Windows XP Operating SystemPage Page How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating SystemNatural Color Pro Software Program How to install the Natural Color Pro softwareLinux Operating System Page Installation Page Page Installation Problems MagicTune Installation Problems MagicRotationSystem Requirements HardwareUninstall Service PacksOverview OSD Mode sOverview OSD Mode MagicBright Color Tab DefinitionImage Setup GammaImage Tab Definition PositionSource SelectHelp Asset IDHow multiple users can use adjusted color values Color CalibrationColor Calibration Color CalibrationTo ensure normal operation, please restart your system TroubleshootingTroubleshooting Symptom Check List SolutionsWhat is MagicRotation? Basic FunctionTo execute AutoRotation, it should be done as below InterfaceInterface Page Help It shows the Help of MagicRotation program Before You Call Technical Support Symptom Connection Check Signal Cable on the screen?When connecting DVI-A to D-SUB Cable When connecting DVI cableDisplay → Settings Answer Self-Test Feature CheckQuestion Self-Test Feature Check Useful TipsResolution Input Signal, TerminatedPower Supply Signal CableDimensions WxDxH/ Weight State Normal Operation Power saving mode Power offEnvironmental considerations Plug and Play CapabilityPreset Timing Modes Pixel Clock Sync Polarity Display Mode Frequency MHz KHzHorizontal Horizontal FrequencyContact Samsung WORLD-WIDE North AmericaLatin America EuropeAsia Pacific Middle East & AfricaTerms For Better DisplayAuthority MéxicoWarranty What is Image retention ?Power Off, Screen Saver, or Power Save Mode Suggestions for specific applications
Related manuals
Manual 59 pages 49.59 Kb Manual 59 pages 8.32 Kb Manual 56 pages 44 Kb Manual 60 pages 20.4 Kb Manual 59 pages 54.9 Kb Manual 60 pages 35.37 Kb Manual 59 pages 59.65 Kb Manual 60 pages 55.29 Kb Manual 59 pages 5.84 Kb Manual 56 pages 16.42 Kb Manual 58 pages 31.11 Kb Manual 55 pages 2.48 Kb Manual 56 pages 6.58 Kb Manual 56 pages 12.6 Kb Manual 58 pages 60.32 Kb Manual 57 pages 48.55 Kb Manual 58 pages 52.69 Kb Manual 57 pages 52.43 Kb Manual 54 pages 17.9 Kb Manual 58 pages 3.03 Kb Manual 58 pages 5.53 Kb Manual 57 pages 19.95 Kb Manual 60 pages 36.54 Kb Manual 55 pages 22.05 Kb Manual 57 pages 18.26 Kb Manual 55 pages 34.48 Kb Manual 60 pages 18.99 Kb Manual 59 pages 6.23 Kb Manual 56 pages 8.29 Kb Manual 59 pages 57.6 Kb Manual 56 pages 8.28 Kb Manual 60 pages 24.57 Kb Manual 55 pages 12.76 Kb Manual 55 pages 18.37 Kb Manual 54 pages 38.25 Kb Manual 58 pages 44.46 Kb Manual 58 pages 51.28 Kb

LS19MBPXFV/EDC, LS19MBXXHV/EDC, LS19MBXXF2/CI, LS19MBXXXV/EDC, LS19MBXXFV/EDC specifications

The Samsung LS19MBPXHV/EDC, LS19MBXXFV/EDC, LS19MBXXHV/EDC, and LS19MBPXFV/EDC represent a series of high-quality monitors designed for versatility and exceptional performance. Each model in this series is crafted to cater to varying user needs, providing robust features that enhance productivity and visual experience.

One of the key attributes of these monitors is their display technology. These models utilize an advanced LED-backlit LCD panel, offering vibrant colors and crisp images. The resolution typically reaches Full HD (1920x1080), ensuring that users can enjoy sharp and clear visuals whether for work or entertainment purposes. This high resolution is particularly beneficial for graphic design, multimedia editing, and gaming.

Additionally, the monitors feature a wide viewing angle, often up to 178 degrees horizontally and vertically. This allows users to view the screen comfortably from various positions without significant color distortion or visibility reduction. This characteristic enhances collaboration in work environments where multiple users may need to view the screen simultaneously.

The design of these monitors emphasizes ergonomics and user comfort. Many models offer height adjustment, tilt, and swivel functions, enabling users to customize their viewing experience according to their preferences. This is especially important for prolonged use, as it helps reduce neck and eye strain.

Another noteworthy feature is the inclusion of various connectivity options, such as HDMI, VGA, and DisplayPort. This versatility allows users to integrate the monitor with different devices, be it laptops, desktops, or gaming consoles, making it an excellent choice for both office and home setups.

Samsung’s commitment to energy efficiency is evident in these models, which often come with Energy Star certification. This not only contributes to lower electricity bills but also aligns with modern sustainability practices.

In terms of additional technologies, features like Flicker-Free technology and Eye Saver Mode are included to minimize screen flickering and reduce blue light emissions. This enhances user comfort during extended viewing sessions, making these monitors suitable for a wide range of tasks, from professional graphic design to casual browsing.

In summary, the Samsung LS19MBPXHV/EDC, LS19MBXXFV/EDC, LS19MBXXHV/EDC, and LS19MBPXFV/EDC monitors stand out for their excellent display quality, ergonomic design, and versatile connectivity options, making them suitable for various applications, whether in a professional environment or home use.