Connecting the Power (C27FG70FQ* model only) | Tidying Up the Connected Cables |
1
DC 19V | HDMI IN 1 |
SERVICE
|
| 2 | DP | IN |
| HDMI IN |
| ||
HDMI IN 1 |
|
|
| |
|
|
|
| |
DC 19V |
|
|
|
|
Connect cables to the appropriate connectors.
1
2
3
1Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port on the back of the product.
2Next, connect the power cable to the power outlet.
3Press the JOG button on the back of the monitor to turn it on.
――The input voltage is switched automatically.
2
3
41
Run the cables through the holder in the direction of the arrow from the lower part of the holder, as shown in the image.
Pull cable down to adjust the length.
Use the same method to clean up the other cables.
Caution
While rotating the cable fixed on the holder, the cable may be separated or damaged. In this case, first remove the cable from the holder.
23