PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
•• Set to PC when connected to a PC.
•• Set to AV when connected to an AV device.
•• If you connect a PC using a
――This function does not support Analog mode.
――Supplied for the wide models only such as 16:9 or 16:10.
――If the monitor is in HDMI, DisplayPort mode and the screen says Check Signal Cable or power saving mode activates,
press the JOG button to display the 
icon. You can select PC or AV.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•• Working: The power LED is on when the product is turned on.
••
Reset All
Return all the settings for the product to the default factory settings.
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Information
View the current input source, frequency and resolution.
Key Repeat Time
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
Picture
OnScreen Display
System
Information
Information
*********
**kHz **Hz NN
****x****
Optimal Mode
****x**** **Hz
Exit
――The displayed image may differ depending on the model.
30