Samsung LC27F591FDIXCI, LC27F591FDUXEN, LC27F591FDMXUE, LC27F591FDEXXV, LC27F591FDMXCH manual

Page 8

Caution

•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

-- Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.

•• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).

-- Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.

•• Use the product at the recommended resolution and frequency. -- Your eyesight may deteriorate.

•• Do not put DC power adapters together.

•• Remove the plastic bag from the DC power adapter before you use it.

•• Do not let water enter the DC power device or get the device wet. -- An electric shock or fire may result.

-- Avoid using the product outdoors where it can be exposed to rain or snow. -- Be careful not to get the DC power adapter wet when you wash the floor.

•• Do not put the DC power adapter near to any heating apparatus. -- Otherwise, a fire may result.

•• Keep the DC power adapter in a well-ventilated area.

•• If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

Make sure to rest the AC/DC power adapter flat on a table or the floor.

•• Do not hold the product upside-down or move it by holding the stand. -- The product may fall and become damaged or cause an injury.

•• Looking at the screen too close for an extended period of time can deteriorate your eyesight.

•• Do not use humidifiers or stoves around the product.

•• Rest your eyes for more than 5 minutes for every 1 hour of product use.

•• Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

•• Store small accessories out of the reach of children.

•• Exercise caution when adjusting the product angle or stand height. -- Your hand or finger may get stuck and injured.

-- Tilting the product at an excessive angle may cause the product to fall and an injury may result.

•• Do not place heavy objects on the product. -- Product failure or personal injury may result.

•• When using headphones or earphones, do not turn the volume too high. -- Having the sound too loud may damage your hearing.

8

Image 8 Contents
C27F591FD Table of contents Installing the Software Before Using the Product Securing the Installation SpaceSafety Precautions Precautions for storageCleaning Electricity and SafetyInstallation Operation Page Preparations PartsControl Panel Icons DescriptionAdjust Volume, Mute Display Function Key Guide Direct Key guideFunction Key Guide IconsDescriptionJOG Button Power saving/Non-signal mode JOG Button ActionChanging the Volume setting Changing Brightness, Contrast and Sharpness settingsReverse Side Adjusting the Product Tilt PortDescriptionPrecautions for moving the monitor Anti-theft LockInstallation Attaching the StandPlace the protective Styrofoam cushion included Two screws on the base to tightly fix itArrow and adjust it, as shown in the image Removing the StandConnecting and Using a Source Device Connecting and Using a PCConnection Using the D-SUB Cable Analogue Type Pre-connection CheckpointsConnection Using the Hdmi Cable Connection Using an HDMI-DVI CableConnection Using an DP Cable Connecting to HeadphonesConnecting the Power Correct posture to use the productDriver Installation Setting Optimum ResolutionYou can customize the brightness to suit your preferences Screen SetupSamsung Magic Bright Brightness ContrastSharpness ColorEye Saver Mode Game ModeSamsung Magic Upscale Hdmi Black LevelChange the picture size Screen AdjustmentPicture Size Adjusting OSD On Screen Display settings TransparencyPosition LanguageSetup and Reset VolumeSound Mode SoundFreeSync Off Deactivate the Eco Saving Plus function Off TimerEco Saving Plus PC/AV Mode Power LED OnReset All Source DetectionInstalling the Software Easy Setting BoxRestrictions and Problems with the Installation System RequirementsTroubleshooting Guide Testing the ProductChecking the Resolution and Frequency Check that the power cable is connected properlyChange the Color settings Check the cable connection to the productSet the frequency on your graphics card Power options or Bios Setup on the PCPower & sleep or Bios Setup on the PC Model Name SpecificationsGeneral Standard Signal Mode Table Vertical Frequency Hz Pixel Clock MHz Sync Polarity H/V67.500 60.000 148.500 +/+ ――Horizontal FrequencyResponsibility for the Pay Service Cost to Customers Product damage caused by customers faultAppendix Not a product defect
Related manuals
Manual 38 pages 1.07 Kb Manual 1 pages 52.45 Kb Manual 38 pages 45.54 Kb Manual 38 pages 46.8 Kb Manual 38 pages 1.82 Kb Manual 38 pages 53.63 Kb Manual 38 pages 43.17 Kb Manual 38 pages 42.76 Kb Manual 38 pages 42.35 Kb Manual 38 pages 40.33 Kb Manual 38 pages 44.36 Kb Manual 38 pages 33.59 Kb Manual 38 pages 45.91 Kb Manual 38 pages 44.45 Kb Manual 38 pages 62.23 Kb Manual 38 pages 12.6 Kb Manual 39 pages 46.28 Kb Manual 38 pages 48.64 Kb Manual 38 pages 51.76 Kb Manual 38 pages 47.24 Kb Manual 38 pages 47.96 Kb Manual 38 pages 29.19 Kb