Identification of features
Bottom
Battery chamber cover | Battery chamber |
Battery holder
Memory card slot
Icon | Status | Description |
|
|
|
|
| - For the first 7 seconds, the lamp blinks at 1 second |
| Blinking | intervals. |
| - For the final 3 seconds, the lamp blinks quickly at 0.25- | |
|
| |
|
| second intervals. |
| Blinking | For 2 seconds, the lamp blinks quickly at |
| intervals before taking a picture | |
|
| |
|
|
|
| Blinking | A picture will be taken after about 10 seconds and 2 |
| seconds later a second picture will be taken. | |
|
| |
|
|
|
| Blinking | Pressing the remote control shutter button will allow an |
| interval of 2 seconds before the image is taken. | |
|
| |
|
|
|
Battery cover lever
To open the battery chamber cover, slide it in the direction shown above.
Camera Status Lamp
Status | Description | |
After taking a picture | The lamp blinks while saving the image and then | |
turns off when ready to take another picture | ||
| ||
|
| |
While voice memo recording | The lamp blinks | |
When the USB cable is | The lamp lights up | |
inserted to a PC | (LCD monitor turns off after initializing the device) | |
|
| |
Transmitting Data with a PC | The lamp turns on (LCD monitor turns off) | |
When the USB cable is | The lamp is off | |
connected to a printer | ||
| ||
|
| |
When the printer is printing | The lamp blinks | |
When the AF activates | The lamp lights (The subject is in focus) | |
The lamp blinks (The subject is not in focus) | ||
|
8