Samsung VP-D391I/MEA, VP-D391/XEF Setting the white balance manually, Select Custom WB

advanced recording

Settings	Contents	On-screen
		display
Auto	This option is generally used to control the white balance automatically.
Daylight	This controls the white balance according to the outdoor ambience, especially for
	close up and when the subject is of one dominant colour.
Cloudy	This option is used when you make a recording in cloudy weather.
Fluorescent	This option is used when you make a recording under white fl uorescent lights.
Tungsten	This option is used when the surroundings are less than 3200K of tungsten lights.
Custom WB	You can manually adjust white balance to match the light source or situation

Setting the white balance manually :

1.Select "Custom WB".

•The indicator ( ) and the message "Set white balance" are displayed.

2.Frame a white object such as a piece of paper so that it fi lls the screen. Use an object that is not transparent.

•If the object that fi lls the screen is not focussed, correct the focus using "Manual Focus" ➥page 42

3.Press the Joystick.

•The white balance setting will be applied and indicator ( ) is displayed.

•The White Balance function will not operate in EASY.Q mode.

•It is recommended that you specify "Digital Zoom" to "Off" before setting white balance. ➥page 57

•Reset the white balance if lighting conditions change.

•During normal outdoor recording, setting to Auto may provide better results.

•Pressing the MENU button while setting the Custom WB will cancel the Custom WB setting and sets the White Balance to "Auto".

	White thick
	paper
MENU
	BATT.
STBY SP	0:00:30
16:9Art Wide 10Sec	60min
	S 16BitIt
	C.Nite 1/30

50_ English