Lightolier 9100 manual Lytespan Track Lighting 

Page 2

Page 2 of 4

Lytespan® Track Lighting  9100

Radius™ Track 1 Circuit Track

Direct Mounting

Toggle Bolts and Nylon Insulators are furnished with the Track: 2 per 2', 4', and 6', 3 per 8'. Mount toggles through existing holes in track. Top of track is flush to ceiling. Recommended for wall and ceiling mounting.

Additional supports may be required when wall mounting or when using heavy lighting fixtures on the Radius track.

Nylon Spacer

Toggle Bolt

Suspended Grid Ceiling Mounting Clips Square Edge Panels and 9/16" - 15/16" T-Bars

Clip attaches at any point along a straight section of T-Bar by rotating the clip. Pass clip stud through existing holes in track and secure with nut.

Junction Box Cover

Mounts above "L" feed 9155WH,BK or "T" 9151WH, BK. Mounts to a 4" or 3" octagon outlet box. Direct mount track to surface. Canopy is 3/32" thick and 4-1/2" square.

9060WH Matte White

9060BK Matte Black

Live End Canopy

Mounts directly under a 4" or 3" octagonal outlet box. Live End Canopy attaches mechanically to the J-Box. The canopy is polarized (meaning the connector goes into the track one way, providing consistent alignment of the neutral and hot wire connections with the track

and lighting fixtures). 9160WH Matte White 9160BK Matte Black

Outlet Box (by others) Supply Leads

Ground Wire

Canopy

3/23"

4-1/2"

Slot

4-1/2"

Screw

Centerline

J-Box

Additional supports may be required when supporting heavy lighting fixtures on the Radius track.

9189 (9) Clips

T-Runner

Square

Edge Panel

GND

NEUT

 

4 3/8"

Square

Track Unit

9/16" - 15/16"

1/2"

3/16"

Canopy

Regressed Edge Panel Mounting Clips

9/16" - 15/16" T-Bars

Clip attaches at any point along a straight section of T-Bar by rotating the clip. Pass clip stud through existing holes in track and secure with nut.

Additional supports may be required when supporting heavy lighting fixtures on the Radius track.

9188 (9) Clips

T-Runner

Regressed

Edge Panel

Saddle Canopy Kit

Track Unit

Mounts anywhere along the track (excluding

 

track mounting hole locations) for power feed

 

from a 4" or 3" octagon box. Track must be

 

mounted at 45ϒto the mounting holes when

 

using a 3" J-Box. Max load 20 amp. at 120V

 

60Hz.

 

9163WH Matte White

 

9163BK Matte Black

 

Dead End Cover

 

45ϒ

3" Octagon J-Box (by others)

9/16"-

15/16" 5/16" - 13/32

 

4-1/2"

 

 

square

Electrical Fitting

 

Job Information

Type:

 

 

Canopy Cover

1-3/16"

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

 

We reserve the right to change details of design, materials and finish.

 

www.lightolier.com © 2008 Philips Group • C0808

Lightolier is a Philips group brand

Image 2
Contents Lytespan Track Lighting  Lytespan Track Lighting  Polarity Tab Electrical Fitting by others Track Unit Wall Outside Corner Wall Inside Corner

9100 specifications

The Lightolier 9100 series is an exemplary line of lighting fixtures known for its blend of aesthetic appeal and advanced technological features, making it a popular choice for both residential and commercial applications. Designed to provide high-quality illumination while ensuring energy efficiency, the 9100 series embodies the spirit of modern lighting design.

One of the standout features of the Lightolier 9100 is its versatility in various settings. The fixtures are designed for both recessed and surface-mounted applications, allowing designers and homeowners to utilize them in diverse architectural layouts. The minimalist design of the 9100 series seamlessly integrates into different decor styles, whether it’s contemporary, traditional, or minimalist.

The series employs advanced LED technology, which results in significant energy savings compared to traditional lighting options. With a high lumen output per watt, the 9100 fixtures produce brilliant light while consuming less energy. This not only reduces electricity bills but also contributes to a more sustainable lighting solution. Additionally, the long lifespan of LEDs means less frequent replacements, further enhancing cost-effectiveness and convenience.

Another significant characteristic of the Lightolier 9100 is its adjustable brightness feature. Many models within the series come with dimming capabilities, allowing users to customize light levels according to their needs and preferences. This feature not only enhances the ambiance of any space but also offers functional benefits for varied tasks, from reading to hosting gatherings.

The build quality of the 9100 fixtures is noteworthy, boasting durable materials that withstand the test of time while maintaining an elegant appearance. The fixtures are designed with heat management in mind, which is crucial for longevity and performance. Effective thermal management ensures that the LED components operate within safe temperature limits, thereby enhancing their lifespan.

In conclusion, the Lightolier 9100 series stands out in the lighting market with its combination of style, efficiency, and functionality. Through its advanced LED technology, flexibility in installation, and customizable brightness options, it provides an ideal lighting solution for various applications. Whether enhancing the ambiance of a living space or illuminating a commercial area, the Lightolier 9100 fixtures deliver exceptional performance and reliability.