Rear

7)Dynamic Contrast

Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast.

>> Click here to see an animation clip

Brightness button [ ]	When OSD is not on the screen, push the button to adjust brightness.
	>> Click here to see an animation clip
	Not available in MagicBright mode of Dynamic Contrast.
Adjust buttons [ ]	Adjust items in the menu.
Enter button [ ] /	Activates a highlighted menu item. /
SOURCE button	Push the 'SOURCE/ ', then selects the video signal while the OSD is
	off. (When the 'SOURCE/ ' button is pressed to change the input
	mode, a message appears in the upper left of the screen displaying
	the current mode -- Analog, Digital or USB input signal.)
	If the monitor is used as a USB monitor (when connected via USB
	cable), select USB mode by clicking the Enter icon.
AUTO button	Use this button for auto adjustment.
	>> Click here to see an animation clip
Power button [ ]	Use this button for turning the monitor on and off.
Power indicator	This light glows blue during normal operation, and blinking blue once
	as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

The configuration at the back of the monitor may vary from product to product.

POWER port	Connect the power cord for your monitor to the power port on the back of
	the monitor.
DVI IN (HDCP) port	Connect the DVI Cable to the DVI IN (HDCP) port on the back of your
	monitor.
RGB IN port	Connect the signal cable to the 15-pin, D-sub port on the back of your
	monitor.