There is no image on the screen.
Is the power indicator on the monitor blinking at 1 second intervals?
The monitor is in PowerSaver mode.
Press a key on the keyboard to activate the monitor and restore the image on the screen.
If there is still no image, press the'SOURCE/ 'button.
Then press any key on the keyboard again to activate the monitor and restore the image on the screen.
I cannot see the On Screen Display.
The screen shows strange colors or just black and white.
Connected using the DVI | You may get a blank screen if you boot the |
cable? | system before you connect the DVI cable, or |
| disconnect and then reconnect the DVI cable |
| while the system is running as certain types of |
| graphic cards do not send out video signals. |
| Connect the DVI cable and then reboot the |
| system. |
Have you locked the On | Unlock the OSD by pressing the [MENU / ] |
Screen Display (OSD) | button for at least 5 seconds. |
Menu to prevent |
|
changes? |
|
Is the screen displaying | Check the signal cable connection. |
only one color as if |
|
looking at the screen | Make sure the video card is fully inserted in it's |
through a cellophane | slot. |
paper? |
|
Have the screen colors | Reboot the computer. |
become strange after |
|
running a program or |
|
due to a crash between |
|
applications? |
|
The screen suddenly has become unbalanced.
Has the video card been set properly?
Have you changed the video card or the driver?
Have you adjusted the resolution or frequency to the monitor?
Set the video card by referring to the video card manual.
Adjust screen image position and size using the OSD.
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.
The screen is out of focus or OSD cannot be adjusted.
LED is blinking but no images on the screen.
There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.
Have you adjusted the resolution or frequency on the monitor?
Is the frequency properly adjusted when checking the Display Timing on the menu?
Have the Windows colors been set properly?
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing Modes).
Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ from product to product.)
Windows XP :
Set the resolution at the Control Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 :
Set the resolution at the Control Panel → Display → Settings.
| Has the video card been | Set the video card by referring to the video |
| set properly? | card manual. |
There is a message that | Have you installed the | Install the monitor driver according to the Driver |
reads "Unrecognized | monitor driver? | Installation Instructions. |