Samsung LS24HUCESQ/EDC, LS24HUCEBS/EDC, LS24HUCEBQ/EDC, LS24HUCEB7/CI, LS24HUCEBQSEDC manual Rear

3)Movie

Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.

4)Custom

Select this mode when you want to adjust the image according to your preferences.

>> Click here to see an animation clip

Brightness button [ ]	When OSD is not on the screen, push the button to adjust brightness.
	>> Click here to see an animation clip

Enter button [] / SOURCE button

AUTO button

PIP button

Activates a highlighted menu item. /

Push the '', then selects the video signal while the OSD is off. (When

the button is pressed to change the input mode, a message appears

in the upper left of the screen displaying the current mode -- PC, DVI, AV, S-Video, Component and HDMI input signal.)

Changing the source is only allowed for external devices that are connected to the monitor at the time.

>> Click here to see an animation clip

(Available in PC mode only)

When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically.

>> Click here to see an animation clip

( Available in PC/DVI Mode Only )

In PC or DVI Mode, turns on Video screens in PIP Mode.

You can view a picture from AV, S-Video, or Component through the PIP screen in PC and DVI(PC) mode.

Power button [ ]	Turns the monitor On/Off.
Power indicator	This will enable you to see the overall power status of the system. For more
	information, see the PowerSaver section.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Rear

The configuration at the back of the monitor may vary from product to product.

POWER S/W / POWER