Samsung LS24HUCEBS/EDC, LS24HUCESQ/EDC manual Changes the opaqueness of the background of the OSD

	MENU → , →	→ → , →
	Changes the opaqueness of the background of the OSD.
	1) High
Transparency	2) Medium
	3) Low
	4) Opaque
	MENU → , →	→ , →	→ , →
	If no signal is being received or the signal is very weak, a blue screen
	automatically replaces the noisy picture background. If you wish to
	continue viewing the poor picture, you must set the "Blue screen" mode
Blue Screen	to "Off".
	- Operates only for AV, S-Video, Component and HDMI mode.
	MENU → , →	→ , →	→ , →

HDMI Black

Level

When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level.

- Operates only for HDMI mode.

MENU → , → → , → → , →

MPA (Motion Picture Acceleration-Motion Picture Acceleration) This function is used to play movies.

MPA You can enjoy better screen quality.

If your monitor is used as a normal monitor, turn this function Off.

MENU → , → → , → → , →

The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time.

-The Screen Scroll function scrolls the screen for the specified period of time.

-This function is not available when the power is turned off.

1) Safety Screen

:Determines whether to turn the Screen Scroll function Off or On. 2) Interval

Safety	: Determines the time interval to run the Screen Scroll operation.
Screen
	(1~10 Hour)
	The time is calculated on the basis of the power on time.
	3) Second
	: Determines the time period to run the Screen Scroll operation.
	(10~50 Second)
	4) Type
	: You can change the Safety Screen Type.
	(Pixel, Bar, Eraser)
	MENU → , →	→ , →	→ , →
	When your PC is in Power Saving mode, and this function is turned 'On',
	power is supplied to the 'AUDIO POWER' terminal of the external
Audio Power	speaker on the back of your monitor. If this function is turned 'Off', power
	is not supplied to that terminal.
	MENU → , →	→ , →	→ , →

Adjusts the brightness of the Power LED.

The higher the level, the brighter the Power LED.

LED If you set a brightness level, the LED blinks and is saved after one

Brightness second.

MENU → , → → , → → , →

Safety

Screen

Interval

Second

Type