Samsung EC-NV40ZBBA/IT manual Self-timer / Remote control, Description of Self-timer / Remote mode

Self-timer / Remote control

This function is used when the photographer would also like to be in the picture.

- Selecting a self-timer :
When you press the ‘shutter’ button, the picture	DOUBLE
will be taken after the specified time has	2 SEC
elapsed and the self-timer function will stay on.	10 SEC
	OFF
- Selecting a remote mode :
Pressing the shutter button of a separate remote
control will allow an interval of 2 seconds before
the image is taken. After taking a picture, the
remote mode will be maintained.
But, pressing the Power button will cancel the remote mode.

■Description of Self-timer / Remote mode

Icon	Mode	Description
	OFF	You can not use the self-timer function.
	10 SEC	Pressing the shutter button will allow an interval of
		10 seconds before the image is taken.
	2 SEC	Pressing the shutter button will allow an interval of
		2 seconds before the image is taken.
	DOUBLE	A picture will be taken after about 10 seconds and
		2 seconds later a second picture will be taken.
	MOTION	The camera detects the subject’s movement 6 seconds
		after pressing the Shutter button, and the picture is
	TIMER
		taken when the movement is stopped.
	REMOTE	You can take a picture by remote control instead of
		using the shutter button of the camera.

■Remote control range

When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range.

[Shutter button on the

remote control]

■Replacing battery for the remote control

Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre.

Use the CR 2025 3V battery.

● When taking a picture using the self-timer, the self-timer lamp works as follows :

10 second self-timer setting :

The self-timer lamp blinks at 1 second interval for the first 7 seconds. It blinks at 0.25 second interval for the remaining 3 seconds.

2 second self-timer setting :

The self-timer lamp blinks at 0.25 second interval for 2 seconds.

●If you operate the Back button during the self-timer operation, the self-timer function is canceled.

●Use a tripod to prevent camera shake.

<<39 >>