Samsung EC-NV40ZSBB/IT, EC-NV40ZBBA/FR, EC-NV40ZSDA/E3 Motion Timer, Self-timer / Remote control

Self-timer / Remote control

■ Motion Timer

Motion	Icon & Self-timer lamp
Pressing the shutter button after	Blink (1 second interval)
setting the Motion Timer
Detecting the subject’s movement	Blink (0.25 second interval)
No movement is detected	Turn on and the image is taken after
	2 seconds

■ The Motion Timer flows are as followings. (Movie Clip mode excluded)

Selecting the Motion Timer  Pressing the Shutter button  Confirming the composition (Within 6 sec.)*1  Starting the detection (Swing your hands fully)*2  Stopping the detection (Do not move)  Taking an image (after 2 sec.)

*1 : The camera detects the subject’s movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds.

*2 : Move your body or hands fully.

In the following cases, the Motion Timer may not operate.

● The focus distance is over 3m.
● The exposure is too bright or dark.
● In backlight conditions.
● The movement is insignificant.
● The movement is detected beyond the
center part (50%) of the sensor where the
movement is recognized.
● If the camera doesn’t sense any movement	[The detection range of
for 30 seconds, or the camera doesn’t sense		Motion Timer]
stillness after sensing movement.

<<40 >>