Samsung EC-ES70ZZBPPE1, EC-ES71ZZBDSE1, EC-ES71ZZBDRE1 Extremes in temperature may cause problems

Page 82

Important notes

åExtremes in temperature may cause problems.

-If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.

åCaution on Using the Lens

-If the lens is subjected to direct sunlight, it could result in the discoloration and deterioration of the image sensor.

-Take care not to get fingerprints or foreign substances on the surface of the lens.

åIf the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time.

åIf the camera is exposed to an electronic interference, it will turn itself off to protect the memory card.

åCamera Maintenance

-Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used.

Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell of the camera and also affect its performance. Rough handling can damage the LCD monitor. Take care to avoid damage and keep the camera in its protective carry case at all times when not in use.

åDo not attempt to disassemble or modify the camera.

åUnder certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction.

åWhen images are uploaded or downloaded, the data transfer may be affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again.

åBefore an important event or going on a trip, you should check the camera condition.

-Take a picture for testing the camera condition and prepare extra battery.

-Samsung cannot be held responsible for camera malfunctions.

åIf the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged. In this case, reset the date and time correctly before the recording.

081

Image 82
Contents ES70/ES71 Instructions Getting to Know your camera002 Contents Volume Start up sound Shutter sound Beep sound AF sound Resize Rotating an image Photo Style Selector Image Adjust Smart AlbumSoftware Package Contents System chartSold Separately Identification of features Front & TopMode button BackMemory card slot Information / Up button Battery chamber coverBottom Function button Tripod socket FlashSelf-timer lamp Mode iconBP70A rechargeable battery Specification Connecting to a Power SourceNumber of images and battery life Using the BP70A Charging LED 014 Inserting the memory card Using the Anti-scratch MaskInsert the battery as shown Insert the memory card as shownInstructions on how to use the memory card When the memory card is used incorrectlyCamera can use SD/SDHC Memory Cards You can record videos of up to 4GB or 2hours eachWhen using the camera for the first time For more information about the World Time, refer to the p.54LCD monitor displays information about the shooting LCD monitor indicatorFunctions and selections Use the up or down button to navigate through the menus How to use the menuUse the left or right button to select a sub menu How to use the Smart Auto mode Starting the recording modeSelecting modes Each scene is recognized in the following conditions How to use the DIS mode How to use the Program modeSelect the DIS mode by using the Mode button. p.21 Using the Photo Help Guide mode How to use the Scene modes Frame Rate How to use the Movie modeMovie clip size and type are listed below 30 FPS, 15 FPS SelectablePausing while recording a movie clip Successive Recording Recording the movie clip without soundPressing the shutter button down half way Things to Watch Out for When Taking PicturesACB p.47 function Shutter button Power buttonStill image mode Zoom buttonCamera Wide Zoom Optical zoom WideDigital zoom Wide Button to take macro pictures Info Disp / Up button Macro / Down buttonButton Button will display the image information Appears on the LCD monitorAvailable focusing method, by recording mode Selectable, ä Infinity focus range ModeFlash range Focus lockFlash / Left button Normal Macro Auto macroFlash mode indicator Self-timer / Right button Smart Auto Flash icon will appear in Smart Auto modeMotion Timer Self-timer mode indicatorDo not move à Taking an image after 2 sec OK button When you press the Menu button, a menu related to eachMenu button Shooting Menus belowHow to Enable Functions Using the Menu Button Photo Size / Movie SizeCompensating Exposure Click the Up/Down button from Quality / Frame rateExposure compensation Factor Press the OK button. The value youWhen Motion Capture is set, ISO speed will be set to Auto Same amount of light is present, byUp the custom white balance ÊUsing the Custom White BalanceFace Detection NormalSelf Portrait Return to previous AF mode if face detection was failureWhen the person being taken does not look at the camera Start filming by pressing the shutter buttonSmile Shot Face ToneFace Retouch Camera automatically takes a picture byMulti AF Auto Focus typeMetering This camera selects allPhoto Style Selector Image Adjust Drive mode Shutter button again Voice Memo Voice RecordingFile type *.wav Recording the movie clip without voice Pausing while recording a voiceYou can record the movie without voice Start up sound VolumeSound # Shutter soundLanguage DisplayAF sound Function DescriptionQuick View Start up imageDisplay Brightness Display Save Their defaults SettingsTo their defaults Formatting a memory InitializationFile name Setting up the Date / Time / Date typeTime Zone Auto power off Imprinting the recording dateExternal monitor Auto Focus lamp Selecting Video out typeOn* The AF lamp will light up in low light conditions Off The AF lamp will not light up in low light conditionsDevice cannot be recognized automatically Setting the USBNtsc U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc Playing back a still image Starting play modeManner mode Playing back a movie clipPlaying back a recorded voice Movie clip capture functionPlaying back a voice memo 060 Smart Album Thumbnail º / Enlargement † buttonThumbnail Window Button. Press the OK button and a Details of Each CategoryImage enlargement Message will be displayedFile, or a movie clip Info Disp / Up buttonPlay & Pause / OK button Temporarily stops playbackLeft / Right / Down / Menu button Delete n buttonAll Setting up the play back function using the LCD monitorShow Menu Tab Main Menu Sub Menu Secondary4X6 Menu Tab Main Menu Sub MenuMenus are subject to change without prior notice Edit ResizeRotating an image Face Retouch Image AdjustNew file name Caused by under exposure to the light sourceChange the contrast by pressing the Left / Right button Brightness will be displayedThen a bar for selecting the contrast Will be displayed Saturation will be displayedStart the Multi Slide Show Starting the Multi Slide ShowSelecting Images Setting Background Music Configure Multi Slide show effectsSetting play interval Unique screen effects can be used for the Multi Slide ShowProtecting images File OptionsDeleting images Up / Down / Left / Right Select an imageVoice memo You can add your voice to a stored still image No indicatorAll Protect / release all saved images Reset Cancel the print setup May not support the wide angle size printRight button again. Sub menu will display Dpof Size secondary menu Cancel, 3X5, 4X6, 5X7Compatible printers Is displayedNo Cancels Copy to Card Copy to Card PictBridge PictBridge Picture Selection PictBridge Print SettingPress the Up / Down button to select the number of prints Be sure to observe the following precautions PictBridge ResetInitializes user-changed configurations Important notesExtremes in temperature may cause problems Samsung cannot be held responsible for camera malfunctionsÅThere is low battery capacity Insert fresh battery ÅFile errorContact a camera service center Delete the file åMemory card errorRemove /re-insert battery and switch the camera on Before contacting a service centerPlease check the following Re-format the memory card Remove/re-insert battery and switch the camera onReset exposure compensation Select appropriate White balance and effectSpecifications Movie clip ·With Audio or without Audio Sdhc card Up to 8GB guaranteed File FormatDC power input connector 4.2 ·Size 640x480 ·Frame rate 30 fps, 15 fpsSales region Power Source740mAh ~ 40CFor Windows users Transferring files to your computer for WindowsPrograms contained on the CD You must plug the end of the cable with the indicator light Insert the installation CD in a compatible CD-ROM driveConnect your camera to your PC with the USB cable Click Click the pop-up message Remove the USB cableUsing Intelli-studio For details, select Menu à Help in the programTransferring files to your computer for Mac For Mac usersTurn on the camera FAQ Correct disposal of batteries in this product Correct Disposal of This Product Samsung Eco-mark
Related manuals
Manual 98 pages 60.32 Kb Manual 98 pages 19.72 Kb Manual 98 pages 35.08 Kb Manual 98 pages 58.07 Kb Manual 98 pages 47.72 Kb Manual 98 pages 55.03 Kb Manual 98 pages 33.37 Kb Manual 98 pages 34.01 Kb Manual 98 pages 10.92 Kb Manual 98 pages 27.43 Kb Manual 98 pages 59.45 Kb Manual 97 pages 56.16 Kb Manual 98 pages 23.34 Kb Manual 98 pages 13.9 Kb Manual 100 pages 2.19 Kb Manual 97 pages 13.7 Kb