Samsung UE40B7000WWXXC Setting Up Anynet+, Switching between Anynet+ Devices, Setup, Anynet+ Menu

¦Setting Up Anynet+

TPress the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+ (HDMI-CEC).

❑Setup

■Anynet+ (HDMI-CEC) → Off / On

To use the Anynet+ Function, Anynet+ (HDMI-CEC)must be set to On.

N When the Anynet+ (HDMI-CEC)function is disabled, all the Anynet+ related operations are deactivated.

■Auto Turn Off → No / Yes

Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.

N The active source on the TV remote must be set to TV to use the Anynet+ function.

N If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

Media Play (USB & DLNA)

Application	Anynet+ (HDMI-CEC)
	Content Library
	Internet@TV
	Home Network Centre
		Setup
	Anynet+ (HDMI-CEC)	: On		▶
	Auto Turn Off	: Yes
		UMove	EEnter	RReturn
		Setup
	Anynet+ (HDMI-CEC)	: On
	Auto Turn Off	: Yes		▶
		UMove	EEnter	RReturn

¦Switching between Anynet+ Devices

1.Press the TOOLS button. Press the ENTEREbutton to select Anynet+ (HDMI-CEC).

2.Press the ▲ or ▼ button to select Device List, then press the ENTEREbutton. N Anynet+ devices connected to the TV are listed.

N If you cannot find a device you want, press the red button to scan for devices.

3.Press the ▲ or ▼ button to select a particular device and press the ENTEREbutton. It is switched to the selected device.

NOnly when you set Anynet+ (HDMI-CEC)to On in the Application menu, the Device List menu appears.

NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

View TV

Device List

Recording: DVDR

DVDR MENU

DVDR INFO

Receiver: Off

Setup

UMove EEnter RReturn

NThe time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed.

N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.

N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Anynet+ mode changes to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) MENU	Shows the connected device menus. E.g. If a DVD recorder is connected, the disc
	menu of the DVD recorder will appear.
(device_name) INFO	Shows the play menu of the connected device. E.g. If a DVD recorder is connected,
	the play menu of the DVD recorder will appear.
Recording: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that
	support the recording function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

NIf more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

English - 58