Samsung UE46D8090YSXZG, UE40D8090YSXZG, UE55D8090YSXZG manual Plug & Play Initial Setup

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Plug & Play is available only when the Source is set to TV.

✎✎Before turning on the TV, make sure the antenna cable is connected (p. 6).

1	Selecting the OSD
	Language
2	Setting up the Network
3	Software Upgrade
4	modeSelecting the usage
5	Select Country
	(Depending on the
	country)
6	ModeSetting the Clock
7	Selecting search
	options for auto tuning

8 Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Set up your network connection. Press the ENTERE button to start. If you do not know your network set up information or want to set to it later, select Skip. We suggest you skip network connection setup now and refer to “Network menu” in the e-Manual for set up requirements and instructions, and the Network Connection section of this manual (p. 13).

You can set up the network connection later using the Network menu.

Select Next to upgrade TV software. Your TV will automatically upgrade, if your TV need a software upgrade. If you want to upgrade later, select the Skip. For more information, refer to “Software Upgrade” (Preference Features → Support Menu) in the e-Manual.

✎✎This may take some time, depending on network status.

Press the ▲ or ▼ button to select Home Use, and then press the ENTERE button twice.

✎✎Select the Home Use mode. Store Demo mode is for retail environments.

Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate country.

✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

✎✎When you input the PIN number, 0-0-0-0 is not available. Set the Clock Mode automatically or manually.

Auto: Select the time zone where you are located.

Manual: Allows you to manually set the current date and time.

Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels.

For more information, refer to Channel → Auto Tuning.

✎✎When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite channels is displayed.

✎✎When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable channels is displayed.

✎✎Press the ENTERE button at any time to interrupt the memorisation process.

If you want to watch a broadcast Programme, select Close. If you want to enjoy the Smart Hub, select the Smart Hub. The Smart Hub will start. For more detailed information, refer to “Smart Hub” in the e-Manual.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 7