Samsung UE40D8090YSXZG, UE46D8090YSXZG, UE55D8090YSXZG manual Connecting to a Common Interface slot

Page 12

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”.

1.Insert the CI CARD Adapter into the two holes on the product 1.

Please find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port.

2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3.Insert the “CI or CI+ CARD”.

TV Rear

We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting. Insert the card after attaching the CI Card Adapter on TV. It is difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

English - 12

Image 12
Contents Czech BN68-03442L-02Securing the Installation Space Digital TV noticeStill image warning 10 cmAccessories Holder-Wire stand Holder Ring 4 EAViewing the Control Panel Viewing the Remote Control Installing batteries Battery size AAAConnecting to an Antenna Changing the Input SourceUse to select TV or an external input Plug & Play Initial Setup Connecting to AV devices Using an Hdmi or an Hdmi to DVI cable up to 1080pComponent connection Connecting to an Audio device and PC Using an Optical Digital a Headphone ConnectionUsing an Hdmi cable or an Hdmi to DVI cable or a D-sub cable Connecting to a Common Interface slot Insert the CI Card Adapter into the two holes on the productNetwork Connection LAN Port onExternal Modem How to view the e-Manual This function is not enabled in some menusUsing the Zoom mode To return to the previous screen, press the Return buttonTry Now Displays the corresponding menus Zoom Magnifies a screen Index Displays index screenInstalling the Wall Mount Vesa Spec. a * B Standard Screw 75 X200 X 400 XSecuring the TV to the wall To Avoid the TV from FallingTroubleshooting Issues Solutions and ExplanationsLicence List of Features Storage and MaintenanceSpecifications Hinweis zu Digitalfernsehen Warnung bei StandbildernAbsichern des Aufstellbereichs Zubehör Standfuß mit Kabelhalter Haltering 4 StückMontieren des Standfußes mit Kabelhalter Bedienfeld Fernbedienung Einlegen von Batterien Batteriegröße AAAÄndern der Eingangsquelle Anschließen an eine AntenneExt.1, Ext.2 und PC bleiben immer aktiviert Software-Update Plug & Play AnfangseinstellungJe nach Land So setzen Sie diese Funktion zurückAnschließen an ein AV-Gerät Mit Hilfe eines HDMI- oder HDMI/DVI-Kabels bis zu 1080pComponent-Anschluss Anschließen an einen PC und ein Audiogerät Mit Hilfe eines HDMI-, HDMI/DVI- oder D-Sub-Kabels Anzeigemodi D-Sub- und HDMI/DVI-EingangAnschließen an den Common INTERFACE-Steckplatz Befinden sich neben dem Common INTERFACE-AnschlussNetzwerkverbindung LAN-Anschluss anDer Wand Externes ModemManual-Anleitung Diese Funktion ist in manchen Menüs nicht verfügbarMethode Anzeigen der InhalteAnbringen der Wandhalterung VESA-Spezifikation Standardschraube 19~22 75 X 23~27 200 X32~40 200 X 46~60 400 X 65~75 600 X Befestigen des Fernsehgeräts an der Wand So verhindern Sie, dass das Fernsehgerät umkipptMaterial, wie z. B. Dübel Probleme Lösungen und Erklärungen FehlerbehebungLizenz Liste der Funktionen Lagerung und WartungTechnische Daten This page is intentionally Left blank
Related manuals
Manual 46 pages 49.5 Kb Manual 338 pages 27.9 Kb Manual 338 pages 11.86 Kb Manual 1 pages 24.06 Kb Manual 337 pages 60.61 Kb Manual 337 pages 55.07 Kb Manual 337 pages 50.71 Kb Manual 337 pages 45.33 Kb