Samsung HT-J4200/ZF, HT-J4200/EN manual 3D Precautions, Safety Information

•Use only a properly grounded plug and wall outlet.

-- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

•To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

•Do not allow children to hang on the product.

•Store the accessories (battery, etc.) in a location safely out of the reach of children.

•Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

•Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service centre.

•To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.

•Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.

•Do not dispose of batteries in a fire.

•Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

•There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

WARNING :

•TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•To reduce the risk of fire or electric

shock, do not expose this appliance to rain or moisture.

CLASS 1 LASER PRODUCT

This product is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION :

•INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

CLASS 1	LASER PRODUCT
KLASSE 1	LASER PRODUKT
LUOKAN 1	LASER LAITE
KLASS 1	LASER APPARAT
PRODUCTO	LÁSER CLASE 1

3D Precautions

IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.

Read and understand the following safety information before using the 3D function.

•Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches.

If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest.

•Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest.

•A responsible adult should frequently check on children who are using the 3D function.

If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest.

•Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.)

•Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury.

•If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.

•The product outputs 3D signals only through an HDMI cable connected to the HDMI OUT port.

•The video resolution in 3D play mode is fixed to the resolution of the original 3D video. You can not change the resolution.

•Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode.

•You must use a high-speed HDMI cable for proper output of the 3D signal.

•Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 3.5 meters from the screen.

•Place the 3D video screen at eye level for the best 3D picture.

•When the product is connected to some 3D devices, the 3D effect may not function properly.

•This product does not convert 2D content into 3D.

•"Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of the Blu-ray Disc Association.

Safety Information

3 - English

HT-J4200_EN-ENG_1213.indd 3

2015/2/6 11:12:18