Network Connection
You can connect your product to your network router using one of the methods illustrated below.
Wired Network
| Broadband modem |
| (with integrated router) |
Or | Broadband |
service |
Router |
Broadband service
Broadband
modem
NOTE
\\ Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).
\\ DSL users, please use a router to make a network connection.
\\ To use the AllShare function with your PC, you must connect your PC.
Wireless Network
Wireless Router
Broadband
service
NOTE
\\ If the wireless router supports DHCP, your product can use a DHCP or static IP address to connect to the wireless network.
\\ Set your wireless router to Infrastructure mode.
\\ The product supports only the following wireless security key protocols:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
\\ Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure.
\\ If you select the Pure
\\ If your router supports WPS
WPS will automatically configure the SSID and WPA key in either mode.
\\ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).
\\ To use the AllShare function with your PC, you must connect your PC.
English 7