Setup
Digital Output Selection
|
|
|
|
| Audio Stream |
|
| |||
Setup | Definition | Connection |
| Dolby | Dolby | Dolby |
| |||
PCM | Digital | DTS | ||||||||
|
|
| Digital | TrueHD | HRA | MA | ||||
|
|
|
| Plus |
| |||||
|
|
|
|
|
|
|
|
| ||
| Decodes Primary, |
|
|
|
|
|
|
|
| |
PCM | Secondary and Effect | HDMI Receiver | Up to PCM | Up to PCM | Up to PCM | Up to PCM | Up to PCM | Up to PCM | Up to PCM | |
audio streams together | 7.1ch | 5.1ch | 7.1ch | 7.1ch | 6.1ch | 7.1ch | 7.1ch | |||
|
| |||||||||
| into PCM audio. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
| Decodes Primary, |
|
|
|
|
|
|
|
| |
| Secondary and Effect |
|
|
|
|
|
|
|
| |
Bitstream | audio streams together | HDMI | DTS | DTS | DTS | DTS | DTS | DTS | DTS | |
into PCM audio, then re- | ||||||||||
|
|
|
|
|
|
|
| |||
| encodes the PCM audio |
|
|
|
|
|
|
|
| |
| into DTS bitstream. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
| Outputs only the Primary |
|
|
|
|
|
|
|
| |
| audio soundtrack (main |
|
|
|
|
|
|
|
| |
| soundtrack of the movie) |
|
|
|
|
|
|
|
| |
Bitstream | so that your receiver | HDMI 1.3 | Up to PCM | Dolby | Dolby | Dolby | DTS | |||
(Audiophile) | can decode the audio | Receiver | 7.1ch | Digital | Digital Plus | TrueHD | HRA | MA | ||
| ||||||||||
| bitstream. You will not |
|
|
|
|
|
|
|
| |
| hear Secondary and |
|
|
|
|
|
|
|
| |
| Effect audio. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Dynamic Range Control
You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected.
•Off : Turn Dynamic Range Control off.
•On : Choose to listen to a movie at a lower volume without losing clarity of dialog.
•Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack.
AV Sync
Video may look slower than the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.
•You can set the audio delay time between
0 msec and 300 msec. Set it to the optimal status.
Audio Return Channel
You can enjoy TV sound via Home Cinema speakers by using just one HDMI cable.
•Off : Turn Audio Return Channel funtion off.
•Auto : Listen to TV sound from Home Cinema speakers if your TV is compatible with Audio Return Channel function.
✎NOTE
When Anynet+
Using an ARC (Audio Return Channel)- uncertified HDMI cable may cause a problem in compatibility.