6.Turn on your product.
•To listen to music from iPod/iPhone over the product, press the FUNC. button on the product to select "iPod" mode.
•After you select "iPod" mode, turn the volume of the product down to avoid hearing damage.
•You can control the speaker volume of iPod/ iPhone with a volume wheel or a volume bar.
•When iPod/iPhone is stopped or in a power saving mode, a Wireless transmitter is turned to the Sleep Mode.
When iPod/iPhone is turned to the Deep Sleep Mode, the Wireless transmitter is off.
Operation status of the wireless transmitter's LED
LINK
STANDBY
L
I
N
K
STANDBY
CHARGE
| Function | ||
Display |
|
| |
LINK | STANDBY | ||
| |||
| (Blue LED) | (Red LED) | |
|
|
| |
| Pairing |
| |
LED ON | successfully | STANDBY | |
| completed |
| |
LED BLINK | Processing iPod/ | LOW BATTERY | |
(Long blink) | iPhone | ||
| |||
|
|
| |
LED BLINK | Processing | Pairing failed | |
(Short blink) | pairing | ||
| |||
|
|
| |
!CAUTION
If you use the main unit nearby a wireless device such as a laptop computer, an AP, or Wifi, any unstable operation error can happen.
Do not insert any other card except the TX card dedicated to the product. If a different TX card is used, the product may be damaged or the card may not be removed easily.
Do not insert the TX card or in the reverse direction.
Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem.
The transmission distance from the product to the wireless transmitter is about 5m, but may vary depending on your operation environment.
The audio signal may be weakened or even lost where there exists an obstacle such as a wall or partition between the product and wireless transmitter or if you move around carrying the wireless transmitter.