Samsung HT-Z210R/XET, HT-Z210R/EDC, HT-Z210R/XEF, HT-Z210M/MEA, HT-Z210R/XEE manual Listening to radio

4 connecting the video out to your tv

5 connecting audio from external components

OPTICAL : Connecting an External Digital Component

Choose one of the four methods for connecting to a TV.

AUX1 : Connecting an External Component/MP3 player

Components such as an MP3 Player

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1. Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital component.

2. Press the AUX button on the remote control to

select DIGITAL IN.

AUX IN 2

AUX IN 2

METHOD4	METHOD1
(supplied)	METHOD2
	METHOD3

1.Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out

of the external component/MP3 player.

AUX IN 1

2. Press the AUX button on the remote control to select AUX1 input.

• You can also use the FUNCTION button on the main unit. The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ (BT AUDIO) ➞ FM.

Audio OUT

Audio Cable (not supplied)

• You can also use the FUNCTION button on the

main unit.

The mode switches as follows :

Optical Cable (not supplied)

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ (BT AUDIO) ➞ FM.

External Digital Component

M  HT-Z210/TZ212/TZ215 doesn't support Bluetooth function.

AUX2 : Connecting an External Analog Component

6 listening to radio

Connecting the FM Antenna

1.	Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2.	Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid

METHOD 1 : HDMI

Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.

METHOD 2 : Component Video

If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV.

METHOD 3 : Scart

If your television is equipped with a SCART input, connect a SCART (not supplied) from the AV OUT jack on the back panel of the main unit to the SCART IN jack on your television.

Analog signal components such as a VCR.

1. Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component.

•Be sure to match connector colors.

2.Press the AUX button on the remote control to select AUX 2 input.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞USB ➞ (BT AUDIO) ➞ FM.

AUX IN 2

Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right.

surface.

Listening to Radio

Remote Control

1.Press the TUNER button to select the FM band.

2.Tune in to the desired station.

•Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.

•Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.

•Manual Tuning : Briefl y press the ,,. button to increase or decrease the frequency incrementally.

Main Unit

METHOD 4 : Composite Video

Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.

M  Resolutions available for the HDMI output are 480p, 576p, 720p,1080i/1080p.

This product operates in Interlace scan mode (576i, 480i) for component output.

If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Cinema using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).

Please check the logo (If your TV has an logo, then it supports the Anynet+ function.)

External Analog Component

M  You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

1.Press the FUNCTION button to select the FM band.

2.Select a broadcast station.

•Automatic Tuning 1 : Press the STOP (¦) button to select PRESET and then press the #,$ button to select the preset station.

•Automatic Tuning 2 : Press the STOP (¦) button to select MANUAL and then press and hold the #,$ button to automatically search the band.

•Manual Tuning : Press the STOP (¦) button to select MANUAL and then briefl y press the button to tune in to a lower or higher frequency.

M  This unit does not receive AM broadcasts.

4 - English 5 - English 6 - English