Ramsey Kit Warranty | Ramsey Electronics QRP20 specs

The Ramsey Kit Warranty

Please read carefully BEFORE calling or writing in about your kit. Most problems can be solved without contacting the factory.

Notice that this is not a "fine print" warranty. We want you to understand your rights and ours too! All Ramsey kits will work if assembled properly. The very fact that your kit includes this new manual is your assurance that a team of knowledgeable people have field-tested several "copies" of this kit straight from the Ramsey Inventory. If you need help, please read through your manual carefully, all information required to properly build and test your kit is contained within the pages!

1.DEFECTIVE PARTS: It's always easy to blame a part for a problem in your kit, Before you conclude that a part may be bad, thoroughly check your work. Today's semiconductors and passive components have reached incredibly high reliability levels, and it’s sad to say that our human construction skills have not! But on rare occasions a sour component can slip through. All our kit parts carry the Ramsey Electronics Warranty that they are free from defects for a full ninety (90) days from the date of purchase. Defective parts will be replaced promptly at our expense. If you suspect any part to be defective, please mail it to our factory for testing and replacement. Please send only the defective part (s), not the entire kit. The part(s) MUST be returned to us in suitable condition for testing. Please be aware that testing can usually determine if the part was truly defective or damaged by assembly or usage. Don't be afraid of telling us that you 'blew-it', we're all human and in most cases, replacement parts are very reasonably priced.

2.MISSING PARTS: Before assuming a part value is incorrect, check the parts listing carefully to see if it is a critical value such as a specific coil or IC, or whether a RANGE of values is suitable (such as "100 to 500 uF"). Often times, common sense will solve a mysterious missing part problem. If you're missing five 10K ohm resistors and received five extra 1K resistors, you can pretty much be assured that the '1K ohm' resistors are actually the 'missing' 10 K parts ("Hum-m-m, I guess the 'red' band really does look orange!") Ramsey Electronics project kits are packed with pride in the USA. If you believe we packed an incorrect part or omitted a part clearly indicated in your assembly manual as supplied with the basic kit by Ramsey, please write or call us with information on the part you need and proof of kit purchase

3.FACTORY REPAIR OF ASSEMBLED KITS:

To qualify for Ramsey Electronics factory repair, kits MUST:

1.NOT be assembled with acid core solder or flux.

2.NOT be modified in any manner.

3.BE returned in fully-assembled form, not partially assembled.

4.BE accompanied by the proper repair fee. No repair will be undertaken until we have received the MINIMUM repair fee (1/2 hour labor) of $25.00, or authorization to charge it to your credit card account.

5.INCLUDE a description of the problem and legible return address. DO NOT send a separate letter; include all correspondence with the unit. Please do not include your own hardware such as

non-Ramsey cabinets, knobs, cables, external battery packs and the like. Ramsey Electronics, Inc., reserves the right to refuse repair on ANY item in which we find excessive problems or damage due to construction methods. To assist customers in such situations, Ramsey Electronics, Inc., reserves the right to solve their needs on a case-by-case basis.

The repair is $50.00 per hour, regardless of the cost of the kit. Please understand that our technicians are not volunteers and that set-up, testing, diagnosis, repair and repacking and paperwork can take nearly an hour of paid employee time on even a simple kit. Of course, if we find that a part was defective in manufacture, there will be no charge to repair your kit (But please realize that our technicians know the difference between a defective part and parts burned out or damaged through improper use or assembly).

4.REFUNDS: You are given ten (10) days to examine our products. If you are not satisfied, you may return your unassembled kit with all the parts and instructions and proof of purchase to the factory for a full refund. The return package should be packed securely. Insurance is recommended. Please do not cause needless delays, read all information carefully.

QRP-20 • 23

QRP20 specifications

The Ramsey Electronics QRP20 is a compact and innovative low-power transceiver designed for amateur radio enthusiasts who appreciate both portability and efficiency in their operations. This QRP (low power) radio is primarily aimed at those who seek to operate on the HF bands, providing an exhilarating experience for operators who thrive on the challenges and satisfaction of making contacts with minimal power output.

One of the standout features of the QRP20 is its compact design. This radio can easily fit into a backpack, making it ideal for field operation, portable use, or emergency communication scenarios. Weighing in at just a few pounds, it’s lightweight enough for extended outings without burdening the operator.

The QRP20 operates on a range of HF bands, specifically covering 20 meters, which is especially popular among amateur radio operators for its relatively consistent propagation and activity level. The transceiver leverages solid-state technology, ensuring reliability and optimizing performance. It can produce an output of up to 5 watts, which is standard for QRP operations, allowing operators to experiment with different antenna configurations and propagation techniques.

Another significant aspect of the QRP20 is its user-friendly interface. The radio features a straightforward layout with well-placed knobs and buttons for efficient tuning and operation. The built-in digital display provides clear visibility of frequency information and operational status, enhancing the overall user experience. In addition, the QRP20 includes a narrow bandwidth filter, which effectively reduces noise and enhances signal clarity, enabling clearer communication even in crowded band conditions.

The QRP20 is equipped with an internal speaker as well as a headphone jack for private listening. It also features a built-in keyer for CW (Continuous Wave) operation, making it versatile for various modes of amateur communication including voice and Morse code.

Powering the QRP20 is effortless, as it can be run off a standard 12V power supply or a rechargeable battery, giving operators flexibility in power sourcing. Whether during portable activations or in a home setup, the QRP20 is adaptable to different operating situations.

In conclusion, the Ramsey Electronics QRP20 is a remarkable choice for amateur radio users who value portability, versatility, and performance. Its efficient design, solid technology, and ease of use make it a compelling addition to any operator's gear, offering a satisfying QRP experience while staying connected with a global community of radio enthusiasts.