Ramsey Electronics QRP20 manual Block Diagram

Page 8

Q3 is a Class C RF amplifier that amplifies the RF output of Q2 to the final RF power output level.

L6,C17 and C18 form a low pass filter (Butterworth) to match the output of Q3 to the antenna and reduce harmonics to acceptable levels as specified by the FCC.

When the keying line is closed, Q4 conducts +12VDC to the oscillator stage, applies a positive bias to the base of Q2 through R8, and +12VDC through choke L4 to the anode of D1, which permits RF to pass through D1 to the filter network while applying negative bias to D2 which blocks RF from passing to the receiver. When the keying line is open, the +12VDC applied to D2 through R13 permits D2 to conduct from the antenna jack to the receiver jack. The buffer and amplifier stages are not keyed, resulting in clean keying, free of chirps and clicks.

BLOCK DIAGRAM:

Q1

Q2

Q3

BUFFER

FINAL

OSC.

 

AMP

D1,D2

DIODE SWITCH

C17.L5,C18

LOW PASS

FILTER

A

B

QRP-20 • 8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CW Transmitter Ramsey Transmitter Kits QRP20 20 Meter CW Transmitter KIT Introduction Watts vs 1 Watt Understanding the Difference QRP-20 WHO should USE a QRP TRANSMITTER? Circuit DescriptionBlock Diagram Parts Supplied with QRP20 Transmitter KIT CapacitorsQRP-20 QRP20 Parts Layout Diagram LEARN-AS-YOU-BUILD Transmitter Assembly Strategy First Assembly StepsQRP-20 Building the VXO Variable Crystal Oscillator Halftime Suggestion Buffer and RF Amplifier Wiring Crystal Oscillator TestingFurther Assembly Your Power Supply and RF Output Power Initial TestsVerifying Transmitter RF Output Maximizing RF Power Output TRANS-RECEIVE OperationRamsey Electronics CASE, Knob & Hardware Option Other Enclosure RecommendationsTroubleshooting Guide Final ConsiderationsQRP-20 Ramsey Kit Warranty Ramsey Model NO. QRP20 Meter CW Transmitter KIT

QRP20 specifications

The Ramsey Electronics QRP20 is a compact and innovative low-power transceiver designed for amateur radio enthusiasts who appreciate both portability and efficiency in their operations. This QRP (low power) radio is primarily aimed at those who seek to operate on the HF bands, providing an exhilarating experience for operators who thrive on the challenges and satisfaction of making contacts with minimal power output.

One of the standout features of the QRP20 is its compact design. This radio can easily fit into a backpack, making it ideal for field operation, portable use, or emergency communication scenarios. Weighing in at just a few pounds, it’s lightweight enough for extended outings without burdening the operator.

The QRP20 operates on a range of HF bands, specifically covering 20 meters, which is especially popular among amateur radio operators for its relatively consistent propagation and activity level. The transceiver leverages solid-state technology, ensuring reliability and optimizing performance. It can produce an output of up to 5 watts, which is standard for QRP operations, allowing operators to experiment with different antenna configurations and propagation techniques.

Another significant aspect of the QRP20 is its user-friendly interface. The radio features a straightforward layout with well-placed knobs and buttons for efficient tuning and operation. The built-in digital display provides clear visibility of frequency information and operational status, enhancing the overall user experience. In addition, the QRP20 includes a narrow bandwidth filter, which effectively reduces noise and enhances signal clarity, enabling clearer communication even in crowded band conditions.

The QRP20 is equipped with an internal speaker as well as a headphone jack for private listening. It also features a built-in keyer for CW (Continuous Wave) operation, making it versatile for various modes of amateur communication including voice and Morse code.

Powering the QRP20 is effortless, as it can be run off a standard 12V power supply or a rechargeable battery, giving operators flexibility in power sourcing. Whether during portable activations or in a home setup, the QRP20 is adaptable to different operating situations.

In conclusion, the Ramsey Electronics QRP20 is a remarkable choice for amateur radio users who value portability, versatility, and performance. Its efficient design, solid technology, and ease of use make it a compelling addition to any operator's gear, offering a satisfying QRP experience while staying connected with a global community of radio enthusiasts.
Top Page Image Contents