Samsung LH55RHEELGW/EN, LH48RHEELGW/EN, LH55RHEELGW/XE manual 172, Preventing afterimage burn-in

Preventing afterimage burn-in

――The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending

•• Regular Text colour Change

-- Use bright colours of similar brightness.

Interval: Change text colour and background colour every 30 minutes

on instruction guide.

•• Powering Off, Screen Saver and Power Saving Mode

-- Power off the product for 2 hours after using it for 12 hours.

-- Go to Display Properties > Power Supply on your PC and set the product to power off as required.

-- Using a screen saver is recommended.

It is best to use a single-colour or moving-image screen saver.

•• Regular colour Change -- Use 2 colours

FLIGHT : TIME

OZ348 : 20:30

FLIGHT : TIME

OZ348 : 20:30

FLIGHT : TIME

OZ348 : 20:30

FLIGHT : TIME

OZ348 : 20:30

Switch between 2 colours every 30 minutes as shown above.

-- Move and change text every 30 minutes as shown below.

Type 1

FLIGHT	TIME
OZ348	20:30
UA102	21:10

Type 2

FLIGHT	TIME
OZ348	20:30
UA102	21:10

FLIGHT : TIME

OZ348 : 20:30

[ Step 1 ]

[ Step 2 ]

•• Avoid combinations of a text colour and background colour of contrasting brightness.

(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of light emitted.)

――Avoid using grey as it may contribute to afterimage burn-in.

――Avoid using colours of contrasting brightness (black and white; grey).

FLIGHT	:	TIME	FLIGHT	:	TIME
OZ348	:	20:30	OZ348	:	20:30

FLIGHT : TIME

OZ348 : 20:30

[ Step 3 ]

-- Regularly display a moving image along with a logo.

Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.

172