Samsung RF905VCLASL/ES manual Operating your Refrigerator, Using the Control Panel

4. Operating your Refrigerator

USING THE CONTROL PANEL

1

2

3

4

5

1	(Only for RF905Q*)
	Press the Bacteria Safe Ionizer button to remove any fl oating or attached germs. Press this button to
Bacteria Safe
	turn the function on or off.
Ionizer	If you press the Bacteria Safe Ionizer button, (	)is turned on.

Press the Fridge button to set the fridge to desired temperature from the range between 1 °C and

7 °C. Default set temperature is set on 3 °C and each time you press the Fridge button, temperature

2will change in following order and temperature indicator will display the desired temperature.

Fridge
	3 °C	2 °C		1 °C		7 °C
	4 °C	5 °C	6 °C

Press CoolSelect+ button for 3 seconds to activate the Cool Select Room function.

Freezer

The temperature is the same as the temperature configured for the freezer compartment.

•The temperature is set to the temperature configured for the freezer compartment so that you can keep frozen food fresh.

Soft Freezing

•When you select Soft Freeze mode -5 °C regardless of the overall temperature setting of the refrigerator. This feature helps keep meat and fish fresh for longer.

	Chill
3	• Regardless of the Freezer set temperature, the temperature will maintain at -1 °C.
	Cool
CoolSelect+
	• When you select Cool mode, temperature of the Cool Select Room will be set on 2 °C. You can
(Cool Select	keep water, juice, soft drink, beer etc cold.
Room)	• When shifting its function after using the [Freezer] function, meat blood or water may come
	CAUTION out of meat or water containing food.

•If meat or fi sh is stored at the [Fridge] setting, it may get deteriorated. When food is not stored according to the settings of the Cool Select Room, the food may get frozen or deteriorated.

•When the button does not work, check if it is set to the Lock. When it is locked, press the Lock/Unlock button for 3 seconds or more until the Unlock Icon ( ) lights on. And then, change the setting by pressing the Cool Select Room for 3 seconds or more.

•When the setting is complete, check the display one more time to see if the setting is correct.