Samsung RL55VTEBG1/EUR, RL52VPBTS1/XEU Operating your refrigerator, Checking the Control Panel

CHECKING THE CONTROL PANEL

4 1

5 2

Each time you press the button, a short beep will sound.

When the temperature setting is done, the set temperature is displayed initially for 5 seconds and then indicator will display the actual temperature of the freezer.

Fridge or Freezer temp indicator will blink when temperature in the fridge or freezer compartment goes up dramatically by storing warm food or frequent door opening. (Fridge or Freezer temperature indicator will stop blinking when temperature in the fridge or freezer is become normal.

If temperature indicator does not stop blinking after several hours, please contact your service center.

02 OPERATING

USING THE CONTROL PANEL (TYPE A)

1Fridge

Touch the Fridge button to set the fridge to desired temperature from the range between 1 °C and 7 °C. Default set temperature is set on 3 °C and each time you press the Fridge

button, temperature will change in following order and temperature indicator will display the desired temperature.

When the temperature setting is done, the set temperature is displayed initially for 5 seconds and then indicator will display the actual temperature of the fridge.

2Freezer

Touch the Freezer button to set the freezer to desired temperature from the range between -14 °C and -25 °C. Default set temperature is

set on -20 °C and each time you touch the Freezer button, temperature will change in following order and temperature indicator will display the desired temperature.

3Lighting (Hold 3sec for Alarm)

Touch the Lighting button to activate the Lighting Function and the light underneath fridge door will be on. The light keeps on while Lighting function is activated.

If you want to adjust the brightness of the light, touch the Lighting button again.

(Adjusting brightness may not be available depending on the models.)

To deactivate the Lighting function, touch the Lighting button again until the light is off.

Touch the Lighting button for longer than 3 seconds to activate the Alarm function.

Alarm indicator will light up and the refrigerator will alert you with alarm sound if the refrigerator door is kept open for longer than 2 minutes.

To deactivate the Alarm function, touch the Lighting button for longer than 3 seconds.

• Lighting activated : Light stay on.

•Lighting deactivated : If you open the freezer door with the fridge door closed the Light will be turned on.

operating _19