Samsung RSG5PURS1/EUR Setting up your side-by-side refrigerator, When moving your refrigerator

Setting up your side-by-side refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many state-of-the-art features and effi ciencies that this new appliance has to offer.

Selecting the best location for the refrigerator

•Select a location with easy access to the water supply.

•Select a location without direct exposure to sunlight.

•Select a location with level (or nearly level) fl ooring.

•Select a location with enough space for the refrigerator doors to open easily.

•Allow suffi cient space to the right, left, back and top for air circulation.

-If your refrigerator is not level, cooling effi ciency and durability can be declined.

-Refer to drawing and dimensions below for overall

space required for use.

•Please ensure that appliance can be moved freely in the event of maintenance & service.

at least 6mm

at least 6mm

When moving your refrigerator

To prevent fl oor damage be sure the front levelling

legs are in the up position (above the fl oor). Refer to ‘Levelling the refrigerator’ in the manual(at page 15).

To protect the fi nish of the fl ooring, place the protection sheet such as packing carton under the refrigerator.

Leg

Screw Driver

When installing, servicing or cleaning behind CAUTION the refrigerator, be sure to pull the unit straight

out and push back in straight after fi nishing.

First things fi rst! Make sure that you can easily move your refrigerator to its fi nal location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth.

	Model		RSG5*	RSG5*CRS
	Width	Without Door	908	908
		With Door	912	912
		Only Cabinet	600	600
Dimension
	Depth	Without Handle	687	687
(mm)
		With Handle	737	742
	Height	Without Door	1745	1745
		With Door	1780	1780

• Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•Do not install the refrigerator where the temperature can drop below 10°C.

•Make sure you disconnect the water supply line BEFORE removing the freezer door. See the next section on “Separating the Water Line” to avoid damage.

setting up _11

01 SETTING UP