Setting Up the Audio Options

-Select “Original” if you want the default soundrack language to be the original languange the disc is recorded in.

-Select “Automatic” if you want the subtitle language to be the same as the language selected as the audio language.

-Some discs may not contain the language you select : in that case the disc will use its original languange setting.

Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use.

1.With the unit in stop mode, press the MENU button.

2.Press the √/® buttons to select Audio Setup page, then press the † or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Note :

•Even when PCM Down sampling is Off Some discs will only output down sampled audio through the digital outputs.

•There is no analog audio output when you play a DTS sound disc.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade- marks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems,

Inc.

Setting Up the Display Options

Display options enable you to set various video functions of the player.

1.With the unit in Stop mode, press the MENU button.

2.Press the √/® buttons to select Display Setup Page, then press the † or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

•Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

•If Video Output is set incorrectly, the screen may be blocked.

•When the resolution is changed during playback, it may take a few seconds for a normal image to appear.

Setting Up the Parental Control

The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

Setting Up the Rating Level / Changing the Password

1.With the unit in Stop mode, press the MENU button.

2.Press the √/® buttons to select Parental Page, then press the † or ENTER button.

3.Press the π/† buttons to select Parental/Password, then press the ® or ENTER button.

4.Press the π/† buttons to select Rating Level you want, then press the ENTER button. e.g) Setting up in KID SAFE.

5.Enter your password, If this is the first time, enter 0000. Then, enter a new password. The new pass-word must be a number other than 0000 to activate the parental control function, then re- enter the new password.

Note

ŒKID SAFE.

´G (General Audiences) : All Ages Admited.

ˇPG (Parental Guidance suggested) : Some material may not be suitable for young children. ¨ PG 13 (PG-13 Parents strongly cautioned) : Some material may be in appropriate for children

under 13.

ˆ PGR (Parental Guide Recommended) : These are not necessarily unsuitable for children, but viewer discretion is advised, and parents and guardians are encouraged to supervise younger viewer.

Ø R (Restricted) : Under 17 requires accompanying adult.

∏ NC17 (NC-17) : No one 17 and under admitted. ” ADULT.

- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.

Setting Up the DivX

1.With the unit in Stop mode, press the MENU button.

2.Press the √/® buttons to select DivX Page, then press the † or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Note :

•Press Ok will make the registration code window disappear.

•DivX can only be accessed at stop mode.