Samsung DVD-C450K/XTC manual Do not try recording copyright protected MP3 files, Repeat playback

-When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension.

General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).

-Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.

Sound quality with MP3 files basically depends on the rate of compression/ decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion

to MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like Kbps or more, only rarely give better sound quality. Conversely, files with decompression rates below 128 Kbps will not be played properly.

- Use a decompression transfer rate of at least 64Kbps when recording WMA files.

Sound quality with WMA files basically depends on the rate of compression/decompression you choose. Getting CD audio sound requires an analog/digital sampling rate, that is conversion to WMA format, of at least 64Kbps and up to Kbps. Conversely, files with decompression rates below 64Kbps or over Kbps will not be played properly.

-Do not try recording copyright protected MP3 files.

Certain "secured" files are encrypted and code protected to prevent illegal copying. These files are of the following types: Windows Media (registered trade mark of Microsoft Inc) and SDMITM (registered trade mark of The SDMI Foundation). You cannot copy such files.

-Important:

The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality and in some cases, inability of the player to read the files).

-This unit can play a maximum of 500 files and 500 folders per disc.

MPEG4 Playback

MPEG4 Play Function

AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” exten- sions can be played.

1.Open the disc tray. Place the disc on the tray. Close the tray.

2.Press the π/† buttons to select an avi file (DivX/XviD) and then press ENTER button.

Repeat playback

Press the REPEAT button to change playback mode. There are 3 modes, such as Track, Folder and Off.

-Track : repeats the track that is playing.

-Folder : repeats the AVI files which have the same extension in the current folder.

-Off

MPEG4 Function Description

	Function						Description
		Skip		During play, press the	or	button, it moves forward or backward 5 minutes.
(		or	)
		Search		During play, press the SEARCH		( or	) button and press again to search at a faster
(		or	)	speed. Allows you to search at a faster speed in an AVI file. (2X, 4X, 8X)
Slow Motion				Allows you to search at a slower speed in an AVI file. (1/2X, 1/4X, 1/8X, 1/16X)
		Play

-These functions may not work depending on MPEG4 file.

CD-R AVI file

This unit can play the following video compression formats within the AVI file format:

-DivX 3.11 contents

-DivX 4 contents (Based on MPEG-4 Simple Profile)

-DivX 5 contents (MPEG-4 simple profile plus additional features such as bi-directional frames. Qpel and GMC are also supported.)

-XviD MPEG-4 compliant Contents.

This unit supports all resolutions up to maximum below.

DivX5

720 x 480 @30fps

720 x 576 @25fps

: Maximum bit rate :4Mbps

Note

•Some MPEG-4 files created on a personal computer may not be play back. That is why Codec Type, Version and Higher resolution over specification is not supported.

•This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.