Using the NFC Function

Connect your NFC compatible device via Bluetooth to the Wireless Audio Portable using this simple set-up procedure. You can play music from the smart phone through the Wireless Audio Portable.

1.Turn on the NFC function on the smart phone and make sure the screen lock function on the smart phone is off. The smart phone's NFC function will not work if screen lock is on.

2.Gently touch the NFC logo [] on the left of the Wireless Audio Portable with the NFC supported device.

•If the Wireless Audio Portable is off, it will turn on automatically.

3.A pop-up asking whether to proceed with the Bluetooth connection appears on the smart phone. Select <Yes>.

•When the connection is complete, the 'connected' message appears.

4.To disconnect the NFC device, touch the device to the Wireless Audio Portable's left panel again.

•To connect another NFC device while the first smart phone is still connected, touch that device to the Wireless Audio Portable's left panel. The Wireless Audio Portable will disconnect the first smart phone and connect to the second smart phone.

✎The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.

-If your device is running an Android OS earlier than Android OS 4.1 Jellybean, you must download the 'Samsung NFC Connection' application from Android market to use the NFC function.

✎The position of the NFC antenna differs on smart phones. Check where the NFC antenna is located before connecting.

✎If your smart phone is covered with a thick case, the connection may not succeed.

✎The N-mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

✎NFC tagging for Bluetooth connection cannot be established while powering on and off.

✎NFC tagging for Bluetooth connection will not work while the battery indicator is blinking.

ENG

English 5