Samsung DVD-HD870/XEL manual Connections, Choosing a Connection, Before Connecting the DVD Player

CONNECTIONS

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components you are connecting for more information on those particular components.

Connecting to a TV (SCART)

-Using the SCART, connect the SCART (EXT) terminal on the rear of the DVD Player to the SCART (IN) terminal of your TV.

-If your TV is not equipped with a SCART you can select one of the following alternative connections:

Connecting to a TV (VIDEO CVBS)

1

Using video/audio cables, connect the VIDEO

(yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

2

Turn on the DVD player and TV.	RED	WHITE YELLOW
	OR	Audio	Video Cable
		Cable
	RED	WHITE	YELLOW

3

Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

-Noise may be generated if the audio cable is too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)

-The number and position of terminals can vary depending on your TV set. Please refer to the user's man- ual of the TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: ( COMPOSITE/S-Video ➝ I-SCAN ➝ P-SCAN ➝ SCART RGB)

-Please do not connect Scart and Component Video (Y, Pb, Pr) output simultaneously, as they may inter- fere and degrade both video output quality.

-If you set the HDMI output resolution 720p or 1080i, S-Video output cannot be used.

English

9