radio
LISTENING TO RADIO
Remote Control
1.Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.
• Manual Tuning : Briefl y press the ,,. button to increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP () button to select PRESET and then press the #,$ button to select the preset station.
• Automatic Tuning 2 : Press the STOP () button to select MANUAL and then press and hold the
#,$ button to automatically search the band.
•Manual Tuning : Press the STOP () button to
select MANUAL and then briefl y press the 
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
•Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear,
PRESETTING STATIONS
Example : Presetting FM 89.10 in the memory
1. Press the TUNER button to select the FM band.
2. Press the ,,. button to select 89.10.
3. Press the TUNER MEMORY button.
• 01 fl ashes in the display.
4. Press the #,$ button to select preset number.
ABOUT RDS BROADCASTING
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.
Description on RDS function
•PTY (Program Type) : Displays the type of programme currently being broadcast
•PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.
•RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.
•CT (Clock Time) : Decodes the real time clock from the FM frequency.
•TA (Traffi c Announcement) : When this symbol fl ashes it shows that the traffi c announcement is in progress.
M RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.
Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.
To show the RDS signals
You can see the RDS signals the station sends on the display.
Press the RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information :
PS NAME RT CT Frequency
•PS (Program Service) : While searching, <PS> appears and then the station names will be displayed. <NO PS> appears if no signal is sent.
•RT(RadioText) : while searching, <RT> appears and then text messages the station sends will be displayed. <NO RT> appears if no signal is sent.
•Frequency : station frequency
ENG
● RADIO
48
• You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before Number disappears from the display.
• Number disappears from the display and the station is stored in memory.
6.To preset another station, repeat steps 2 to 5.
•To tune in to a preset station, press the #,$ button on the remote control to select a channel.
M This unit does not receive AM broadcasts.
About characters shown in the display
When the display shows PS,or RT signals,the following characters are used.
•The display window cannot differentiate upper case and lower case letters and always uses upper case letters.
•The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>
49