connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS (CON'T)
CONNECTING THE FM ANTENNA | ENG |
|
1.Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2.Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.
AUX2 : Rear Panel
HDMI OUT
Audio Cable (not supplied)
If the external analog component has only one Audio Out, connect either left or right.
External Analog Component
OPTICAL : Rear Panel |
HDMI OUT |
Optical Cable |
(not supplied) |
External Digital Component |
|
| ● |
HDMI OUT |
| CONNECTIONS |
| FM Antenna |
|
| (supplied) |
|
M This unit does not receive AM broadcasts.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1.Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component.
•Be sure to match connector colors.
2.Press the AUX button on the remote control to select AUX 2 input.
•You can also use the FUNCTION button on the main unit. The mode switches as follows :
DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM.
M You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver
1.Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital component.
2.Press the AUX button on the remote control to select DIGITAL IN.
•You can also use the FUNCTION button on the main unit. The mode switches as follows :
DVD/CD D.IN AUX 1 AUX 2 USB BT AUDIO FM.
22 | 23 |