Samsung HT-D5500/EN, HT-D5500/XN manual User EQ, Musical Room Calibration Mode, Measurement

Musical Room Calibration

By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment.

50

ASC IN

ASC

microphone

Musical Room Calibration Mode

You will hear either the Musical Room Calibration mode or the User Speaker Settings.

•Off: You will hear sound in the Speaker Setting value.

•On: You will hear sound in the Musical Room Calibration mode.

Measurement

1.Plug the ASC microphone into the ASC IN jack.

2.Place the ASC microphone at the listening position.

•Musical Room Calibration will be automatically set up in the following sequence:

Front L Center	Front R Surround
R Surround L	Subwoofer

•Press the RETURN button to cancel the Musical Room Calibration Setting.

	03
✎NOTE	Setup
 Running the Musical Room Calibration
function takes about 3 minutes.
 Make sure there is no disc in the product when
you run the Musical Room Calibration function.
 If the ASC microphone is disconnected during the
Musical Room Calibration setup, the setup will be
canceled.
 When the Musical Room Calibration function is
activated, the DSP, Dolby Pro Logic ll and SFE
Mode will not work.
 If the product is connected to external devices or
other components (such as an iPod, AUX, D. IN),
the Musical Room Calibration Setup may not work
properly.
 Noise may result in incorrect measurements.
Ensure the room is quiet when you run the
Musical Room Calibration.
 Place the microphone in the main listening
position.
 Make sure there are no objects between the
speakers and microphone.
 Note that the test tones of the speakers may be
loud.
 Do not place the microphone behind furniture or
too close to the wall. Otherwise, it can produce an
incorrect test result.

User EQ

You can configure the equalizer settings manually to your preference.

Settings

Display					User EQ
Audio	0		0	0		0	0	0	0
	6
Network	·
	··
System	·
	0·
Language	·
	·
Security	·
	·
	·
General	-6
	250Hz		600Hz	1kHz		3kHz	6kHz	10kHz	15kHz
Support
		A	Reset	> Adjust			< Move	' Return

English 35

HT-D5500_XAA_1226.indd 35 2011-12-26 ￿￿ 2:20:01